Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Romabio Lime Slurry is an authentic, Italian lime paint used for beautiful, textured finishes, ideal for unpainted and absorbent brick, stone, or masonry surfaces. At first glance, the product looks… Show more
Romabio Lime Slurry is an authentic, Italian lime paint used for beautiful, textured finishes, ideal for unpainted and absorbent brick, stone, or masonry surfaces. At first glance, the product looks dense - because it comes concentrated. But slight dilution with water (5-8% dilution) is enough to make the viscosity perfect for ease-of-use, high coverage, and Romabio’s distinguished flat, European finish. Our unique formulation allows Romabio Lime Slurry to harden like a plaster but be easily applied like our other masonry paints.
Type | Interior/Exterior |
---|---|
Brand | ROMABIO |
Series/Sub-Brand | Lime Slurry |
Color Family | Tintable |
Finish | Flat |
Material | Mineral-based |
Manufacturer Code | SLUR |
APPLICATION REQUIREMENTS:
Specifically designed for vertical surfaces- should NOT be applied to Horizontal or Ground Surfaces such as steps, floors, pavers; or areas subject to a lot of moisture or pooling water.
DAMPEN THE SURFACE - Properly prepare and clean surface with water, prior to application. Dampen the wall to be painted (wet but not dripping) and keep damp as necessary, especially in high heat and direct sunlight.
PAINT May be diluted 5-8%. Apply the 1st coat of diluted paint from bottom to top of the wall with the Romabio Large Masonry Brush in a horizontal pattern taking care to apply the product in the brick joints. Prior to applying the 2nd coat of Romabio Lime Slurry, make sure to wet the wall surface again. 2nd coat apply as 1st coat. See Lime Slurry TDS for more info.
For Interior or Exterior applications of Romabio Lime Slurry where the base of the masonry surface is sealed or has been pre-painted and is unabsorbent, use one coat of Romabio MicroGrip or Medium Grip Primers, first.
DRY TIME The full carbonation of Romabio Lime Slurry will be reached at 20 – 25 days, at the earliest, after initial application (68 °F- RH 60%) under ideal conditions.
PREP Prepare and clean surface. Dampen masonry surface.
DILUTION Product must be diluted prior to application
COATS 2 Coats
TOOLS Apply with a brush, roller, or an HVLP or airless sprayer
DRY TIME 4-8 Hours
COVERAGE
Full Coverage: approximately 50 – 60 sq ft per liter, depending on absorption and type of surface. It is recommended to determine precise coverage by performing an application and absorbency test on the surface where Lime Slurry is to be used.
1 Coat 2.5L/.67 Gal. 15L/4 Gal.
Square Feet 90-100 Sq.Ft. 600-650 Sq.Ft.
Two-coat, easy application process for typical Lime Slurry applications. For a flushed, artistic finish or for highly recessed mortar joints, apply a pre-coat of Romabio Marmorino GF. This will allow for artistic flexibility. Brush on one (1) coat of Marmorino GF into the mortar joints and allow to dry overnight before proceeding to the steps below.