Benjamin Moore Super Hide Low VOC Interior Paint, Eggshell
Super Hide® Interior latex is a professional quality, low VOC formula that offers efficient application, optimal hide and fast dry. This quality acrylic‐blended latex paint is designed to meet the demands of professional painters for a wide variety of commercial and facility maintenance applications. Its uniform finish is ideal for walls and ceilings and offers good touch‐up.
Recommended for use on primed or previously painted interior wallboard, masonry, plaster, wood and metal.
As low as $30.39
- Interior
- Optimal hide
- Efficient application
- Quick drying
- Good touch‐up
- Spatter resistant
| Type | Interior |
|---|---|
| Coverage | 400-450 sq. ft. per Gallon |
| Brand | Benjamin Moore |
| Series/Sub-Brand | Super Hide |
| Color Family | Tintable |
| Finish | Eggshell |
| Material | Water-Based |
| Manufacturer Code | 297 |
Surface Preparation: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust. New plaster or masonry surfaces must be allowed to cure (30 days) before applying base coat. Cured plaster should be hard, have a slight sheen and maximum pH of 10; soft, porous or powdery plaster indicates improper cure. Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound. Poured or pre‐cast concrete with a very smooth surface should be etched or abraded to promote adhesion after removing all form release agents and curing compounds. Remove any powder or loose particles before priming
Application: Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium nylon/polyester brush and premium roller. Avoid lap marks by maintaining a wet edge. This product can also be sprayed.
Spray, Airless:
Pressure / 1,200 – 2,200 PSI
Tip / 0.013 – 0.017
Coverage: 400-450 sq. ft. per gallon
Dry Time: To Touch in 1 hour, To Recoat in 2 -3 hours with 77°F and 50% relative humidity
Clean Up: Wash brushes, rollers, and other painting tools in warm soapy water immediately after use. Spray equipment should be given a final rinse with mineral spirits to prevent rusting.
Write Your Own Review
