Sansin Purity Water-Based Interior Stain, Half Pint
- Rich tones
- Water reducible
- Easy to apply
- Soap and water clean-up
- Ultra low VOCs
- Superior UV protection
- Uniform color
Please Note: However, due to differences in how screens display color, actual color may vary. See your dealer for more details.
Color may vary depending on texture, grain, color, porosity and type of wood and may not be exactly as illustrated.
Always test the purchased product on an inconspicuous part of the project to ensure the color and transparency meet expectations of your control sample.
| Type | Interior |
|---|---|
| Size | Half Pint |
| Color | Pickled White |
| Coverage | 150-400 Sq. Ft. per gallon. |
| Brand | Sansin |
| Material | Water-Based |
| Manufacturer Code | 3150/20/8 |
Surface Preparation: Remove all hardware or cover hardware that cannot be removed. Surface must be dry and free of contaminants such as waxes, silicones, glues and dirt. Do not use steel wool or anything that may leave iron particulate on the wood surface. Repair any defects in the surface, such as holes and cracks using only quality, acrylic-based tinted, wood fillers to match the color of the project. Wood filler must be allowed to dry completely prior to sanding. Extra effort in sanding will pay off in aesthetics. Use 120-150 grit sandpaper and always sand with the grain for best results. Remove dust particles by vacuuming and wipe with damp cloth. Test formula on an inconspicuous wood surface to ensure proper color and penetration.
Application: Apply Purity Interior Stain by sprayer or with a China bristle brush or a pad applicator. Spread the finish evenly. Purity Stain has excellent leveling properties; be careful not to overwork the product. For spray application use conventional or air assist airless, avoid high sheer pumps. Contamination in pump can cause cratering or other surface issues. Equipment should be cleaned before use. Test formula on an inconspicuous wood surface to ensure proper color and penetration. Spread the stain consistently and remove excess to control color and grain raising by brush or rag. To extend the open time of the product add up to 4 oz. of Sansin extender.
Dry Time: Allow 1 hour for drying in proper conditions when the temperature is 70°F (21°C) and the relative humidity is higher than 50%. For deeper color request a stronger formula from your dealer. When using a tinted product be sure to stir well before and during application. Once the surface is completely dry, finish with Purity Interior Clear, Glacier or Floor for a protective finish.
Coverage: 150-400 Sq. Ft. per gallon.
