Sansin Purity Interior Floor Water-Based Urethane Clear Finish, Semi-Gloss, Gallon
Purity Floor Ultra-tough gymnasium grade finish for floors. Purity Floor is a tough but flexible finish that highlights the natural tones and character of your wood floors. Floor is the ultimate in beauty and protection with superb leveling and flow. Choose a Purity Floor solid color formula to bring a long-lasting, pop of color to any flooring project. Available in these clear finishes extra low lustre, low lustre, satin, semi-gloss and gloss.
No matter what your level of experience, a professional-grade finish is easy to achieve. Soap and water clean-up makes tidying up after your project simple. Floor is UV resistant, washable, environmentally friendly, and low in VOC’s.
For optimum UV protection or if a special color or toning is desired, use a pigmented version of Sansin Purity Interior Stain as the first application.
Purity Floor: A modified waterborne urethane finish that is meant to intensify the grain and deepen wood’s natural color (anfeuerung). Easy to apply, durable, chemical and scratch resistant for superior beauty and durability. Available in Gloss, Semi-Gloss, Satin, Low Lustre and Extra Low Lustre formulations. Solid hide colors can topcoat existing oil based paints and finishes.
- Interior
- Water and soap clean up
- Low VOC, low odor
- Water and stain resistant
- Superb leveling and flow
- Gymnasium grade durability
- Scuff and scratch resistant
- Exceptional clarity
- Tough but flexible
| Type | Interior |
|---|---|
| Size | Gallon |
| Color | Clear |
| Coverage | 400-500 Sq. Ft. per gallon |
| Brand | Sansin |
| Finish | Semi-Gloss |
| Material | Water-Based |
| Manufacturer Code | 3608/1 |
Surface Preparation: Remove all hardware or cover hardware that cannot be removed. Surface must be dry and free of contaminants such as waxes, silicones, glues and dirt. Do not use steel wool or anything that may leave iron particulate on the wood surface. Repair any defects in the surface, such as holes and cracks using only quality, acrylic-based tinted, wood fillers to match the color of the project. Wood filler must be allowed to dry completely prior to sanding. Extra effort in sanding will pay off in aesthetics. Use 120-150 grit sandpaper and always sand with the grain for best results. Remove dust particles by vacuuming and wipe with damp cloth. Test formula on an inconspicuous wood surface to ensure proper color and penetration.
Application: Apply the first coat of Sansin Purity Interior Floor by lambs wool or a pad applicator. Spread the finish evenly. Purity Floor has excellent leveling properties; be careful not to overwork the product. For spray application use conventional or air assist airless, high sheer pumps. Contamination in pump can cause cratering or other surface issues. Equipment should be qualified before use. Apply a second coat of Sansin Purity Floor (3-4 mils or 75-100 microns). Sand the second coat with 320 grit sandpaper and remove the sanding dust. Test formula on an inconspicuous wood surface to ensure proper results. Apply the first coat (3-4 mils or 75-100 microns) of Purity Floor by spray, brush, pad or lambs wool applicator. Spread the finish evenly. Allow 4 hours dry time. Apply a second coat of Sansin Purity Floor (3-4 mils or 75-100 microns). Sand the second coat with 320 grit sandpaper and remove the sanding dust. Two coats may be adequate protection. In this case sand after the first coat and not after the second and final coat. For additional protection or gloss apply a third coat after 24 hours Allow a minimum of 24 hours drying time before light traffic and up to 7 days for full cure. To optimize clarity and finish use only Gloss formulas and sand the final coat using an ultra fine (1000 grit) abrasive to remove sheen. Be careful to test technique for uniformity.
Dry Time: To touch at 68°F (20°C) with relative humidity 70%. Allow a minimum of 24 hours drying time before light traffic and up to 7 days full cure. When using a tinted product be sure to stir well before and during application.
Coverage: 400-500 Sq. Ft. per gallon.