Chat with us, powered by LiveChat

WEST SYSTEM® 406-2, Colloidal Silica Adhesive Filler, 1.7 oz.

In stock
SKU
WS4062
 
 

WEST SYSTEM® Epoxy products make up a versatile epoxy system used for everything from basic, long-lasting repairs to the construction of high-performance composites. WEST SYSTEM®, 105 Epoxy Resin®, Hardeners, Fillers, Additives, Reinforcing Materials, Metering Pumps, and Application Tools were developed with the end user in mind.

WEST SYSTEM® 406 Colloidal Silica is an epoxy thickening additive used to control the viscosity of the epoxy. It prevents epoxy runoff in vertical and overhead joints. This is a very strong filler. It creates a smooth mixture, ideal for general epoxy bonding and filleting. It is also our most versatile epoxy filler. Often used in combination with other fillers, 406 can be used to improve the strength, abrasion resistance, and consistency of epoxy fairing compounds. The result is a tougher, smoother surface. You can blend it into any WEST SYSTEM® 105 Epoxy Resin®/200 Series Hardener combination, G/flex® Epoxy 650, or G/5® Five-Minute Adhesive.

Must be mixed with 105 Epoxy Resin® and hardener of your choice.

Resin, Hardener, and Filler are sold separately.

$20.49
each
Select a store
11 Available in stock
Delivery
Available

Thicken blended resin/hardener and create a multi-purpose adhesive for:

  • Smooth Finishes
  • Overhead or Vertical Applications
  • Increasing strength of fairing compounds
  • Joints
  • Cures to Off-White
More Information
TypeAdhesive Filler
Size1.7 oz.
BrandWest System
MaterialAdhesive Filler
Manufacturer Code406-2
MIX RATIO
by volume (300 Mini Pump ratio)
3 parts resin to 1 part hardener
by weight 3.64 parts resin to 1 part hardener

CURE TIME        
Working tie (thin film) is based on which hardener you choose at 72°F (22°C)    
205 Fast Hardener®: 60 to 70 minutes
206 Slow Hardener®: 90-110 minutes
207 Special Clear Hardener®: 100-200 minutes

CURE TEMP: 
Based on which hardener you choose, solid-state curing happens in a wide range of durations at 72°F (22°C). Minimum recommended temperatures:
205 Fast Hardener®: 40°F (4°C)
206 Slow Hardener®: 60°F (16°C)
207 Special Clear Hardener: 60°F (16°C)

Write Your Own Review
You're reviewing:WEST SYSTEM® 406-2, Colloidal Silica Adhesive Filler, 1.7 oz.
Your Rating