Sirca 2K Polyurethanes offer you extreme durability with great flexibility and the feel of a luxury product. Pigmented version of this converter has great leveling properties, good depth of image, and hiding power. This coating is suitable to be applied by a traditional spray gun, airless or Airmix, preferably over a polyester basecoat after it has been properly sanded.
Recommended for use on interior furniture, trim, doors, and kitchen cabinetry. Recommended for spray or airmix application.
Type | 2K Topcoat |
---|---|
Color | Tintable |
Brand | Sirca |
Series/Sub-Brand | Gemini |
Paint Sheen | 5 Sheen |
Material | Solvent-Borne |
Manufacturer Code | 6CR4500G57ET |
Application Method: Traditional Spray Gun, Airless, Airmix, recommended 1 coat.
Mixing Ratio: 100 parts by weight of 6CR4500Gx0, with 6CTH3: 50-55 parts by weight, DPU820/SOL-9054: 30-35 parts by weight, or 100 parts by volume of 6CR4500Gx0, with 50-55 parts of 6CTH3 by volume, with DPU820/SOL-9054: 30-35 parts by volume
Pot Life: 6 hours (reduced at 20% with DPU820/SOL-9054 at 68° F)
Coverage: 392 Sq. Ft. per gallon, or 9.6 sqm/l (1 mil dried).
Application Amounts: 90-150g/mq at 5 (wet mils). Number of coats: 1
Dry Time: 30-35 minutes dust free, mark-proof: 50-60 minutes, stackable: 12 hours
Clean Up: Acetone is recommended, reclaimed acetone is fine. Clean equipment immediately after using. If the polyurethane is left sitting in the gun beyond its pot-life it will harden and be extremely hard to remove.