Sirca 1K/2K Interior & Exterior Topcoat, White
Sirca 1K/2K Interior & Exterior Topcoat, 6OWBP043Gx0 is a white pigmented 1K or 2K topcoat designed for interior or exterior use. The product offers good chemical resistance and excellent elasticity. This product is suitable for finishing any wooden non-walkable interior (1K.2K) or exterior (2K ONLY) surfaces. The overall finish will give you a fine furniture feel. For interior use, this product can be used as a 1K or 2K system.
For exterior projects, this product must be used as a 2K coating.
It is recommended to use an impregnator along with the recommended 2K water borne primer (6FWBP430S01) for the best overall longevity of the project. Do not use the product with temperatures below 15°C and when relative humidity is high since they affect dry times and stackability. Surfaces finished with waterborne products should be cleaned with non-aggressive detergents (not containing acids, ammonia or bleach), without abrasive properties and solvent-free. Avoid the use of acetone or alcohol.
- Color: White
- Interior or Exterior
- Interior can be used as 1K or 2K
- Exterior use must be 2K
- Non-walkable surfaces
- Wood substrates only
- Fast-drying
- Spray application
| Type | 1K/2K Topcoat |
|---|---|
| Size | 5 KG |
| Color | White |
| Brand | Sirca |
| Series/Sub-Brand | Gemini |
| Color Family | White |
| Paint Sheen | 10 Sheen |
| Material | Water-Borne |
| Manufacturer Code | 6OWBP043G1005 |
Application Method: Traditional Spray Gun, Airless, Airmix, recommended 1 -2 coats.
Mixing Ratio Interior: 100 parts by weight of 6OWBP043GX with, 6CW5 (Optional): 20 parts by weight, Water: 0-20 parts by weight according to application device used, or 100 parts by volume of 6OWBP043GX, with 6CW5 (Optional): 25 parts by volume, Water: 0-20 parts by volume.
Mixing Ratio Exterior: 100 parts by weight of 6OWBP043GX with, 6CW5 (Mandatory): 20 parts by weight, Water: 0-20 parts by weight according to application device used, or 100 parts by volume of 6OWBP043GX, with 6CW5 (Mandatory): 25 parts by volume, Water: 0-20 parts by volume
Pot Life: 3 hours (using 6CW5 reduced at 20% at 68° F)
Coverage: 150 -180 micron (maximum). Application Amounts: 150 -180 micron (maximum). Number of coats: 1 or 2
Dry Time: 1 hour dust free, mark-proof: 2 hours, dry to scuff sand: 2 hours, stackable: 12-16 hours
Clean Up: Clean up equipment immediately after use with warm soapy water. If left sitting in the gun beyond its pot-life it will harden and be extremely hard to remove.