Simpson Strong-Tie SET-3G™ High-Strength Anchoring Epoxy Adhesive, 8.5 fl. oz.
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
$37.69
each
- Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
- Design flexibility — improved sustained load performance at elevated temperature.
- Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
| Type | Achoring Epoxy |
|---|---|
| Size | 8.5 fl. oz. |
| Brand | Simpson Strong-Tie |
| Manufacturer Code | SET3G |
| Concrete Temperature °F | Concrete Temperature °C | Gel Time (mins.) | Cure Time (hrs.) |
|---|---|---|---|
| 1. For SI: 1°F = (°C x 9/5) + 32. 2. For water-saturated concrete, water-filled holes and submerged concrete, the cure times should be doubled. 3. For installation of anchors in concrete where the temperature is below 70°F (21°C), the adhesive must be conditioned to a minimum temperature of 70°F (21°C). | |||
| 40 | 4 | 120 | 192 |
| 50 | 10 | 75 | 72 |
| 60 | 16 | 50 | 48 |
| 70 | 21 | 35 | 24 |
| 90 | 32 | 25 | 24 |
| 100 | 38 | 15 | 24 |
Write Your Own Review