Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Seal-Krete® Poly-Shell™ 8000 utilizes the latest development in Polyaspartic coating technology and is the most durable coating available. Poly-Shell™ 8000 is 80% Solids Polyaspartic Floor Coating.… Show more
Seal-Krete® Poly-Shell™ 8000 utilizes the latest development in Polyaspartic coating technology and is the most durable coating available. Poly-Shell™ 8000 is 80% Solids Polyaspartic Floor Coating. It dries quickly and provides unparalleled rapid return to service. It is extremely resistant to heat (temps up to 350°F), UV rays, and a variety of harsh chemicals, including salt, oil, and gasoline. Poly-Shell 8000 is also flexible and allows for natural concrete movement without cracking or peeling, making this system ideal for either indoor or outdoor applications. NOTE: Must mix with Part A.
Show lessType | Interior/Exterior |
---|---|
Size | 2 Gallon |
Color | Clear |
Brand | Seal Krete |
Series/Sub-Brand | High Performance |
Color Family | Part B |
Finish | Gloss |
Material | Polyaspartic Polyurea |
Manufacturer Code | 337004 |
Resin Type: Polyaspartic Polyurea
Coverage: 100-200 sq. ft. per gallon
Dry Times: Recoat in a minimum 2 hours, maximum wait time to recoat 12 hours, Light Traffic 2-4 hours, Vehicle Traffice 24 hours, Full Cure 7 days
Pot Life: 35-40 minutes at 70-80°F and 50% Relative Humidity
Mixing Ratio: 1:1 (Part A to Part B, by volume), Must mix Part A & Part B together for 60-90 seconds with a low speed drill and spiral mixing wand. Must pre-mix prior to use. DO NOT hand mix.
Clean Up: Clean Tools and application equipment immediately after use with active solvent like xylene (in SCAQMD use acetone only). Clean spills or drips while still wet with solvent. Dried product will require mechanical abrasion for removal.