Please wait...
Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Type | Interior Stain |
---|---|
Size | Quart |
Color | Graphite |
Brand | General Finishes |
Color Family | Gray |
Material | Water-Based |
Manufacturer Code | WJQT |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight, with good air movement. Variations in conditions and application technique can significantly affect dry times and coverage.
Surface Prep: Ensure the surface is clean of contaminants and dust. Variations in substrate, prep procedures, and application procedures can significantly affect color. Always test for color before staining your project.
Raw Wood: On hard woods such as Maple, Birch and Oak, sand no finer that 150 grit. On so woods such as Pine, Alder and Cherry sand no finer than 180 grit.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad.
Other Substrates: Can be used. Always test for adhesion.
Application Tips on Raw Wood: Apply stain using a rag, bristle brush, foam brush or paint pad applicator and wipe of excess with a clean cloth. If a darker color is desired, allow the first coat to dry completely and then a 2nd coat can be applied in the same manor.
Application Tips on Existing Finishes or Solid Substrates: Apply stain using a rag, bristle brush, foam brush or paint pad applicator. Remove excess stain with a cloth or bristle brush to achieve desired effect. Note: Do NOT apply a thick coat like a paint without removing excess. Always test for adhesion.
System Recommendations: Finish with 3 coats of any GF clear topcoat.