General Finishes®, Water-Based Glaze Effects, Burnt Umber, Quart
General Finishes®, Glaze Effects are translucent water-based colors used to create decorative finishes. For use over stains and paints, Glaze Effects will add depth and character to any piece.
NOTE: On-screen and printed color representations may vary from actual tinted paint colors. Recommended to test the color on an inconspicuous area before you start any project.
- Interior Only
- Translucent
- Layered for deeper richer looks
- Water-Based
- Quick-drying
- Add depth and character
Create decorative finishes including
- Marbling
- Shabby chic
- Burnishing
- Color washing
Recommended Uses
- Interior Cabinets
- Trim
- Doors
- Furniture
- Use over existing Stain
- Use on non-white painted surfaces
| Type | Glaze |
|---|---|
| Size | Quart |
| Color | Burnt Umber |
| Brand | General Finishes |
| Color Family | Brown |
| Material | Water-Based |
| Manufacturer Code | QTBU |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage. Use GF Accelerator in cool or humid conditions. Use GF Extender in warm or dry conditions.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.
Raw Wood: Not recommended.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with a maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad.
Other Substrates: Can be used with proper priming and/or painting. Always test first.
System Recommendations: Seal Glaze Effects with 2-3 coats of GF topcoat to protect color from wearing away.