General Finishes®, Water-Based ENDURO® Sanding Sealer, Gallon
ENDURO® Professional Water-Base Sanding Sealer is a clear undercoat with strong adhesion properties that forms an easily sandable foundation for your project. This fast-drying pre-catalyzed sealer is designed as a basecoat for General Finishes® topcoats. It's larger resin polymer provides for fast build and the lower price point makes it a popular base coat. Engineered for cabinets & millwork, it can be brushed, rolled, or sprayed. Dries tack-free in 5-10 minutes in ideal conditions.
$68.69
each
- Interior Only
- High-build clear coat
- Sands easily
- Exceptional Clarity
- Quick Drying
| Series/Sub-Brand | ENDURO® |
|---|---|
| Type | Primer |
| Size | Gallon |
| Color | Clear |
| Brand | General Finishes |
| Color Family | Clear |
| Material | Water-Based |
| Manufacturer Code | SSS1 |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage. Use GF Accelerator in cool or humid conditions. Use GF Extender in warm or dry conditions.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.
Raw Wood: Sand with no finer than 220 grit. Ensure any freshly stained or painted surface has dried thoroughly and completely.
Pre-finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non-woven pad. Sand with fine (220-320) foam sanding pad or maroon non-woven pad.
Other Substrates: Can be used with proper priming and/or painting. Always test first.
Sanding Between Coats: Using fine (220-320) foam sanding pad or gray non-woven pad.
System Recommendations: Use 1-2 coats of GF Sanding Sealer for improved build under any GF topcoat. 3-4 total coats of finish are recommended
Write Your Own Review