Gemini Ultra-Seal MAX Pre-Cat Interior Sealer, Clear
Gemini's Ultra Seal Max is a high quality pre-catalyzed lacquer sealer designed to provide rapid cure schedules and exceptional sanding properties. For wood substrates only. For interior use only.
- Color: Clear
- Pre-Cat
- Interior Use Only
- Sealer
- Wood substrates only
- Fast-drying
- Spray application
| Type | Pre-Cat |
|---|---|
| Size | Gallon |
| Color | Clear |
| Brand | Gemini |
| Series/Sub-Brand | Gemini |
| Material | Solvent-Borne |
| Manufacturer Code | USM-0350-1 |
Application Method: If staining, apply the approved Gemini stain of your choosing and let dry per the instructions on the PDS for that particular stain. Using conventional, HVLP, airless, or air assisted equipment, apply this sealer at 3-4 wet mils per coat. Let dry a minimum of 15 minutes. Sand with 280-320 grit no-fill sandpaper and remove sanding dust with clean compressed air, or tack cloth. This sealer must be sanded before applying a topcoat. Typically we recommend a coating system comprised of one coat of USM-0350 applied at 3-4 mils wet film build and 1-2 coats of topcoat applied at 3-4 mils wet film build. Please refer to the Approved Companion Products section of this document for a list of approved topcoats. Please refer to the PDS for the topcoat you choose for dry film limitations for the complete system.
Mixing: Mix material thoroughly before and during use. Material may be mixed by hand or mechanical agitation at moderate speed.
Coverage: 256 Sq. Ft. per gallon at 1 mil dry film thickness.
Dry Time: To touch: 7 minutes, to handle: 9 minutes, to sand & recoat: 15 minutes. Force Dry: Flash- 8-10 minutes, Bake- 15 minutes at 110˚ F, Cool Down- 10 minutes. Stack immediately after cool down Relative humidity will affect the speed of drying. Ideal conditions are 75° F or warmer at 50% humidity or less. Dry time will be faster at higher temperatures and lower humidity and equally slower at colder temperatures and higher humidity.
Clean Up: Use SOL-9011 Non HAPs Thinner to clean up all equipment, when material is in a liquid stage. Dispose of in accordance with Federal, State, and Local regulation regarding pollution.