Formulated to provide a fine, uniform texture over interior surfaces of gypsum drywall, plaster, concrete, wood, and other materials. Swirl patterns and other designs may be created by using a paint brush or texturing brush. Gives a durable, natural white finish.
USG - TREATMENT
Substrate must be sound, dry, clean, and free of oil, grease, mildew, efflorescence, and other foreign materials and/or contaminants. Product, air, and surface temperatures must be maintained at a minimum of 55 °F (13 °C) throughout the finishing process when using joint compound, primer, and texture products. New Drywall Treat joints and nailheads with an appropriate USG Joint Treatment System. New Concrete/Plaster Age at least 60 days before texturing. Remove form oils and efflorescence and grind down form lines. Fill cracks and holes, and level concrete surfaces with SHEETROCK Setting-Type (DURABOND ) or Lightweight Setting-Type (EASY SAND™) Joint Compound or COVER COAT Compound and let dry. Painted Surfaces Lightly sand to dull any sheen and develop “tooth” for good bond. Wash surface with a strong detergent from the bottom up to remove any dust, dirt, or sheen. A strong solution of TSP (trisodiumphosphate) works best. Follow manufacturer’s directions on the container.
for interior surfaces of gypsum, drywall, plaster, concrete, wood and other materials.