Firenzecolor™ Marmur Fine Lime based plaster, 20 KG
- Natural lime plasters most suitable substrate
- Lime-based trowel coating
- Contains marble powder
- Can be used Interior or Exterior
- Anti-mold agent
- Several different textures depends on technique used
| Series/Sub-Brand | Novacolor™ |
|---|---|
| Type | Interior/Exterior |
| Size | 20 KG |
| Finish | Textured |
| Material | Lime Based Plaster |
| Manufacturer Code | 12MF20 |
Surface Preparation & Application: Primer recommended for the substrate. On a completely dry surface, apply one coat of Marmur Fine with a stainless steel trowel, with overlapping motions. Before it dries out, work the surface with a wet sponge trowel. Remove any imperfections and over-product. Wait for the surface to dry completely, then apply a second coat of Marmur Fine with a stainless steel trowel with overlapping motions. Before it completely dries, finish off the surface with a wet sponge trowel, obtaining a compact and rough surface at the same time. In order to obtain a semi-polished and compact effect, work the surface while still wet with using a stainless steel trowel. To improve the visual and tactile effect, it is recommended to keep the surface wet, compacting it until obtaining the desired effect. Different textures can be reached using specific tools and/or Patine, siloxane colour wash, properly diluted. Primer recommended.
Preparation: Do not apply on fresh/new substrates; wait a maturation period of 4 weeks for proper curing time.
Clean Up: With water, immediately after use.
Dilution: None needed, ready for use.
Coverage: 7-9 square feet per kilo. based on one coat application. Yield varies due to the application process.
Dry Time: 24 hours approx. Depending on the substrate absorption rate and environmental conditions. Recommended to allow 24 hours of dry time between coats.
