FastenMaster Deck Frame Waterproof Coating, Gallon
- Extends Life Of The Deck Frame Creates a lasting moisture barrier protection
- Fast And Clean Application No mess coverage with less jobsite waste
- Dries in as little as 20 minutes ** Sets fast for deck board installation
- Coats Hard-To-Reach Places Use in corners tape cannot reach
| Type | Waterproofing |
|---|---|
| Size | Gallon |
| Coverage | 450 lf. |
| Brand | FastenMaster |
| Manufacturer Code | FMDFC-1GAL |
APPLICATION:
FastenMaster’s Deck Frame Coating can be applied using a standard bristle paint brush or a heavy duty, 3/8 in. nap roller. It is recommended to apply a generous and consistent single layer of coating.
• Apply in temperatures above 40 °F /4 °C. Freeze/thaw stable when cured.
• Product is in a liquid state, protect from freezing. If product was frozen, allow 12 hours of thaw time before use.
• Fast dry formula sets in as little as 20 minutes.**
• Full cure in 24 hours @ 70°F/21°C and 50% humidity.**
• Do not apply to dirty/contaminated or wet surfaces.
• Coating remains slightly tacky when cured.
CLEAN UP:
Clean skin or building materials using soap & warm water. Mineral oil or Baby Oil can be used. It is recommended to review the decking manufacturer’s warranty before using cleaners
*Approximate coverage per gallon at 20mil or .5mm dry film thickness **High temperature and / or high humidity may extend set time.