Benjamin Moore Eco Spec Waterborne Interior Latex Paint, Flat
A low odor, zero VOC, 100% acrylic interior latex flat
finish that provides high hiding has excellent touch-up
and a uniform flat finish. Eco Spec® Interior Latex Flat
Finish is ideally suited for commercial, facility
management, and residential applications. Eco Spec®
Interior Latex Flat Finish does not have the odor of
conventional paint that contain ingredients known as
VOCs. This product contains antimicrobial additives
that inhibit the growth of mold and mildew on the
surface of the paint film.
As low as $52.39
- Minimal Odor
- Zero VOC
- Zero Emissions
- Provides a mildew-resistant coating
- Quick return to service
- Dries quickly to a beautiful, washable, and uniform flat finish
- Spatter‐resistant
- Do not paint when air or surface temperature
is below 50 °F (10 °C)
| Type | Interior |
|---|---|
| Coverage | 400–450 sq. ft. per Gallon |
| Brand | Benjamin Moore |
| Series/Sub-Brand | Eco Spec® |
| Color Family | Tintable |
| Finish | Flat |
| Material | Water-Based |
| Manufacturer Code | N373 |
Application: Stir thoroughly before and during use. Apply one or two coats. For best results, use a custom-blended nylon/poly brush, roller or similar product. Apply paint generously from unpainted area into wet area. This product can also be sprayed.
Surface Prep: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.
Coverage: 400–450 sq. ft. per gallon
Clean up: Soap and Water
Dry Time: To Touch: ½ – 1 hour To Recoat: 1 – 2 hours
Write Your Own Review
