DAP® ALEX PLUS® All Purpose Acrylic Latex Caulk Plus, White, 10.1 fl. oz.
DAP® ALEX PLUS® ALL PURPOSE ACRYLIC LATEX CAULK PLUS SILICONE is an excellent quality,
all purpose caulk for sealing a wide variety of interior and exterior surfaces. It contains silicone additives for
greater flexibility and adhesion and shrinks less* for a durable, waterproof seal. ALEX PLUS® is paintable
in just 30 minutes with latex or oil-based paints, saving time. It won’t shine through or discolor the paint for
superior paint finish results. It is easy to apply and tool, low in odor and cleans up easily with water. Cured
caulk is mold and mildew resistant.
$5.49
each
- Strong multi-surface adhesion
- Paint in 30 minutes
- Won’t shine through or discolor paint
- Shrinks less for a durable seal
- 100% waterproof seal
- 100% waterproof seal
- Low odor
- Cured caulk is mold & mildew resistant
- VOC compliant
- Interior/exterior use
| Type | Sealant |
|---|---|
| Size | 10.1 fl. oz. |
| Color | White |
| Brand | DAP |
| Material | Silicone |
| Manufacturer Code | 18152 |
1. Apply in temperatures above 40ºF. Do not apply when rain or freezing temperatures are forecasted within 24 hours. Cooler temperatures and higher humidity will slow down dry time.
2. If using the squeeze tube, remove cap.
3. Cut nozzle at 45º angle to desired bead size.
4. If using the cartridge, load into caulk gun.
5. Fill gap or joint with caulk.
6. If necessary, tool or smooth the bead of caulk with a finishing tool before caulk skins over.
7. Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away.
8. Allow caulk to dry at least 30 minutes (longer in cool or humid conditions) before painting with latex or oil-based paints.
9. Reseal container for storage and reuse.
Write Your Own Review