Cherry Plywood, 4 ft. x 8 ft.

SKU
CHERRYPLY
In stock
Product Details
  • Product Brand:
     
    Selected Brands
  • Type:
     
    Sanded Plywood
  • Material:
     
    Cherry
  • Cherry Plywood, 4 ft. x 8 ft.

    by Selected Brands

    Cherry Plywood panels are lightweight, dimensionally stable and have excellent screw-holding capacity. The panel is constructed to provide the best possible machining results when sawn, routed, shaped and drilled. Proper nails, screws and other fasteners may be placed near the edge without splitting the panel. It is recommended that fine-grit sandpaper and sanding sealer be used prior to staining. Because hardwoods react differently to certain finishes, a test sample should be done first, to determine the desired appearance before final finishing.
    SKU
    CHERRYPLY
    In stock
    Only %1 left
    As low as $180.95
    Please contact your local store for availability.

    Pick up in

    in stock for pick up today

    available for transfer. Check nearby stores

    Not available for pick up in

    available at Full Service locations. Check nearby stores

    Delivery

    Free delivery to 06820 with $500 order

    Delivery

    06820 Delivery is not available.

    See our Shipping Policy

    Please enter a valid zip code

    We'll show updated delivery options for your area

    Non-Stock products require Special Orders. Non-stock products are not carried in stores and are specifically obtained to fill individual orders. Special Orders may have extended lead times. While indicated lead times are typically accurate, Ring's End cannot guarantee transit times provided by third-party shipping companies.

    When you place an order for Non-Stock products, you acknowledge that the size, details, and specifications are correct. There will be no refunds or credits once an order is placed.

    If you have any questions related to Non-Stock products or Special Orders, please contact Customer Service, Monday - Friday, 7 a.m. - 5 p.m. ET via Live Chat, or call us at 203-814-3060. You may email us anytime at websales@ringsend.com.

    * While supplies last; item is discontinued.
    Additional Information
  • Cabinet & Furniture grade
  • Excellent strength and dimensional stability
  • Great screw, nail, glue and staple holding ability on the face; mechanical fasteners do not hold as well on the butt edges and ends
  • Sanded with 120-150 Grit for a smooth stainable/paintable surface
  • Brang / Grade may vary by availability and store location
  • Application
    Plywood grades are (best to worst) A, B, C and D for face or front face. The back grades are (best to worst) 1, 2, 3, and 4. Plywood grades of A1, A2, B1, B2 are a good two-sided product and would be used where both sides are going to be seen. The backside (number grade) does have a few more blemishes than the front. A3, B3, C3 are for plywood that will be seen from one side, but the backside must be clean, although there may be some stain or discoloration on the back, spliced veneer, and so on. One might use this material for the sides of a dresser (who looks inside?), for drawer sides, and shelving. A4, B4, C4 are a one-side-good product. The back may have open knots, filled knots, bad veneer joints or seams. This material will work well for drawer bottoms, and similar.

    Customer Reviews

    0
    0
    Be the first to review this item!
    Write Review
    1 stars
    0
    2 stars
    0
    3 stars
    0
    4 stars
    0
    5 stars
    0
    Write Your Own Review
    You're reviewing:Cherry Plywood, 4 ft. x 8 ft.
    Your Rating