Chat with us, powered by LiveChat

Benjamin Moore Super Spec HP D.T.M. Alkyd, Semi Gloss

SKU
P24
 
 

This product is designed to perform a dual purpose as a direct-to-metal primer and finish. Both coats of the product provide rust inhibition for superior corrosion control. This product provides good color and gloss retention on both interior and exterior surfaces. To be used on Metal, Fences, Equipment, metal buildings, catwalks, railings, metal doors and lockers, machinery, piping, and general maintenance painting of internal/exterior surfaces

*FOR USE ON METAL SUBSTRATES ONLY*

USE COMPLETELY OR DISPOSE OF PROPERLY. This product contains organic solvents which may cause adverse effects to the environment if handled improperly. Emptied containers may retain product residue. Follow label warnings even after container is emptied. Residual vapors may explode on ignition. 

As low as $24.49
color wheelPlease select a color to see available sizes
  • Very good rust inhibition for direct to metal application
  • Tough durable semi-gloss finish hides surface defects for a professional finish
  • Versatile application by roller or various spray methods
  • Dual purpose — primer and finish coat
  • Rust preventative coating
  • Interior or exterior application
  • Provide a mildew resistant coating
  • Not for application directly on galvanized metal
  • Not for floor applications 
More Information
Series/Sub-BrandSuper Spec®
TypeInterior/Exterior
ColorTintable
BrandBenjamin Moore
Color FamilyTintable
FinishSemi-Gloss
MaterialOil-Based
Manufacturer CodeP24

Application:

Surfaces to be painted must be clean and free from wax, oil, grease, dust, rust, loose paint and water soluble materials. All loose rust or peeling paint should be removed and glossy surfaces should be dulled before re-coating.

New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. For best hiding results, tint the primer to the approximate shade of the finish coat, especially when a significant color change is desired.

New shiny non-ferrous metal surfaces that will be subject to abrasion should be dulled with very fine sandpaper or a synthetic steel wool pad to promote adhesion

DO NOT THIN.

Write Your Own Review
You're reviewing:Benjamin Moore Super Spec HP D.T.M. Alkyd, Semi Gloss
Your Rating

Painting Galvanized Steel Blog

How to Paint Metal Surface Blog

Best Paint Primer Guide Blog