Related Products
Product Detail
Benjamin Moore's ADVANCE is a premium quality, waterborne alkyd enamel that delivers the desired flow and leveling characteristics of conventional alkyd paint. It provides a tough, satin finish that stands up to repeated washing. It is easy to apply, resists spattering and cleans up with soap and water.
Features:
- Excellent durability
- Excellent flow and leveling properties
- Extended open time
- Minimal yellowing
- Spatter resistant
- Easy application
- Easy cleanup
- Block resistant
Recommended for:
Ideal for interior doors, trim, cabinets, walls, and ceilings. For primed or previously painted wallboard, plaster, masonry, wood, and metal.
Dry Time – To Touch 4-6 Hours – To Recoat 16 Hours
Surface Preparation:
Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water-soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.
Primer/Finish Systems:
New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. For best hiding results use Benjamin Moore Advance Waterborne Interior Alkyd Primer.
Application:
Stir thoroughly before and during use. Apply one or two coats. For best results, use a premium blended nylon/polyester brush, premium Microfiber/Flock roller, or a similar product. Apply paint generously from the unpainted area into the wet area. This product can also be sprayed.
Thin With Clean Water
Clean Up Clean Water
Product Features
Product DataSheets
We found other products you might like!
