Please wait...
Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
*NOTE: On-screen and printed color representations may vary from actual color once applied.
This high-performance universal colorant is designed for use in the ALLPRO® Flooring System of heavy-duty… Show more
*NOTE: On-screen and printed color representations may vary from actual color once applied.
This high-performance universal colorant is designed for use in the ALLPRO® Flooring System of heavy-duty epoxy, and polyaspartic floor coatings. The colorant is very low in VOC content, has great hiding power, and easy to use.
Recommended Substrates for interior properly prepared concrete floors, warehouses, kitchens, restrooms, laboratories, healthcare facilities, veterinary offices, locker rooms, and garage floors. Not recommended for exterior use as accelerated chalking & fading will occur.
COLOR POD is used to add color to the ALLPRO® 91000 Epoxy and ALLPRO® 91020 Polyaspartic floor coating products.
Show lessType | Interior |
---|---|
Size | 1 Liter |
Color | Silver |
Brand | AllPro |
Color Family | Gray |
Material | Metallic Pigment |
Manufacturer Code | AP-91036-CP |
COLOR POD is used to add color to the ALLPRO® 91000 Epoxy and ALLPRO® 91020 Polyaspartic floor coating products.
Mixing Tools & Speed: Use a paddle mixer and a variable speed drill at low speed (300 to 450 rpm). Take care not to whip air bubbles when mixing as the bubbles will be difficult to remove once the product is applied.
Mixing Instructions: Always consult the Safety Data Sheets (SDS) of the products being used and wear the recommended Personal Protective
Equipment (PPE) before mixing or applying. Avoid contact with eyes and prolonged or repeated contact with skin. Measure and mix the desired amount of coating Part A, per the manufacturer’s product data sheet. Add the COLOR POD to Part A and mix for two (2) minutes. The ratio is one (1) liter COLOR POD to two (2) gallons of ALLPRO® 91000 Epoxy Part A (1 to 8 ratio) and one-half (0.5) liter COLOR POD to one (1) gallon ALLPRO® 91020 Polyaspartic Part A. Always mix COLOR POD with the Part A until homogeneous before adding the Part B.
MIX ONLY WHAT CAN BE USED IN THE INDICATED TIME FRAME TO AVOID ANY LOSS.
Application: Per the product data sheet of the product COLOR POD is added to.
Coverage & Dry Time: Per the product data sheet of the product COLOR POD is added to.
Recoating: Follow the recoating instructions of the coating used.
Clean Up: Ensure adequate ventilation. Wear suitable personal protective clothing and equipment. Clean all tools, equipment, and minor spills with xylene. For containment, ensure adequate ventilation and absorb any spill with an inert dry binding material and dispose of contents/container into safe container in accordance with local, regional, or national regulations.