My Cart
You have no items in your cart.
Chat?
Darien, CT
Address: 181 West Ave, Darien, CT 06820
Bethel, CT
Address: 9 Taylor Ave, Bethel, CT 06801
Boston, MA
Address: 355 Newbury St, Boston, MA 02115
Branford, CT
Address: 25 E Industrial Rd, Branford, CT 06405
Danbury, CT
Address: 59-67 Federal Rd, Danbury, CT 06810
Fairfield, CT
Address: 1139 Post Rd, Fairfield, CT 06824
Hampton, NH
Address: 848 Lafayette Rd, Hampton, NH 03842
Lewisboro, NY
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Madison, CT
Address: 85 Bradley Rd, Madison, CT 06443
Middleboro, MA
Address: 149 Everett St, Middleboro, MA 02346
New Bedford, MA
Address: 1193 Ashley Blvd, New Bedford, MA 02745
New London, CT
Address: 308 S Frontage Rd, New London, CT 06320
New Milford, CT
Address: 140 Danbury Rd, New Milford, CT 06776
Newburyport, MA
Address: 201 Merrimac St, Newburyport, MA 01950
Newton, MA
Address: 50 Needham St, Newton Highlands, MA 02461
Newtown, CT
Address: 14 Church Hill Rd, Newtown, CT 06470
Niantic, CT
Address: 28 Hope St, Niantic, CT 06357
Norwalk, CT
Address: 149 Westport Ave, Norwalk, CT 06851
Orange, CT
Address: 131 Boston Post Rd, Orange, CT 06477
Plymouth, MA
Address: 58 Shops at Five Way, Plymouth, MA 02360
Portland, ME
Address: 1037 Forest Ave, Portland, ME 04103
Portsmouth, NH
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Saco, ME
Address: 35 Scamman St, Saco, ME 04072
South Portland, ME
Address: 153 Ocean St, South Portland, ME 04106
Stamford, CT (Harvard Avenue)
Address: 87 Harvard Ave, Stamford, CT 06902
Stamford, CT (High Ridge Road)
Address: 921 High Ridge Rd, Stamford, CT 06905
Stratford, CT Commercial Paint Center
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeTrumbull, CT
Address: 921 White Plains Rd, Trumbull, CT 06611
Waltham, MA
Address: 14 Warren St, Waltham, MA 02453
Westport, CT
Address: 877 Post Rd E, Westport, CT 06880
Wethersfield, CT
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Wilton, CT
Address: 129 Danbury Rd, Wilton, CT 06897
Woburn, MA
Address: 116 Cummings Park, Woburn, MA 01801
Yarmouth, ME
Address: 412 Route 1, Yarmouth, ME 04096
My Account
Sign In to My Account
- Home
- Shop
- Paint
- Specialty Paint
- Masonry Paint & Coatings
- UGL DRYLOK® Concrete Protector Low Sheen Penetrating Sealer, Clear, Gallon
- UGL DRYLOK® Concrete Protector Low Sheen Penetrating Sealer, Clear, Gallon
UGL DRYLOK® Concrete Protector Low Sheen Penetrating Sealer, Clear, Gallon
DRYLOK® Protector provides clear weatherproof protection against deterioration caused by de-icing salt, gasoline, oil, weathering and efflorescence (white, powdery, salt-like deposits visible on… Show more
DRYLOK® Protector provides clear weatherproof protection against deterioration caused by de-icing salt, gasoline, oil, weathering and efflorescence (white, powdery, salt-like deposits visible on masonry). DRYLOK’s unique SALTLOK® Technology penetrates into the surface providing superior resistance to unsightly efflorescence staining often visible on brick, block and poured concrete surfaces. DRYLOK® Protector seals bare masonry surfaces against dusting, staining, surface cracking and pock marking.
Ideal for interior, exterior, horizontal or vertical masonry surfaces, including concrete driveways, garage floors, basement floors, concrete sidewalks, block retaining walls, brick siding/walkways, terrazzo, and slate surfaces. Worn surfaces with similar clear coatings, which allow water penetration, may be recoated with DRYLOK® Protector. For best results test for proper adhesion on a small area prior to coating entire surface.
Show less $43.39
each
- Interior/ Exterior
- Protects against road salt, weathering, gasoline and oil
- Prevents excessive dusting, surface cracking and pock marking
- Solidifies masonry surfaces for top coat
- Minimizes reoccurring efflorescence
- Primes prior to paint
| Type | Exterior |
|---|---|
| Size | Gallon |
| Color | Clear |
| Brand | UGL |
| Finish | Satin |
| Material | Water-Based |
| Manufacturer Code | 29913 |
Surface Prepartion: Remove all dirt, wax, dust, mildew, and loose or scaling material with a scraper, wire brush, or stiff bristle brush. Masonry surface must be dry and free of dirt, wax, dust, mildew, and loose or scaling material. For proper penetration and adhesion to extremely smooth bare concrete floors, use DRYLOK® ETCH or muriatic acid. Rinse thoroughly (pressure wash for best results). Allow to dry thoroughly according to manufacturer’s directions. If using a pressure washer, do not use on a pressure setting above 1750 PSI to avoid damaging the concrete. Remember, concrete acts like a stone sponge. Pressure washing and general cleaning may trap residual moisture in the concrete. To check for trapped moisture, tape a 12”x12” piece of 3 mil plastic or aluminum foil tightly on all four edges to the surface. Remove it after 24 hours. If the floor side of the plastic or foil is damp, allow additional drying and repeat the test.
Application: Stir thoroughly before application. DRYLOK® Protector appears milky in the can but dries clear. Apply only when air and surface temperature is above 50ºF and the relative humidity is below 60%. Apply by brush, roller or squeegee. Spread evenly, do not allow puddles or heavy surface film to occur. Apply one coat. If after one coat, water droplets are readily absorbed into the surface (extremely porous surfaces), a second coat may be required. Allow 1 hour between coats. DRYLOK® Protector should not be used to build up surface film. As additional coats are applied, sheen build-up will occur and surface will become slippery when wet. On light-colored surfaces, some slight darkening may take place.
Coverage: 400 sq. ft. per gallon, 1-2 coats recommended
Dry Time: To touch 45 minutes, To Recoat 1 hour
Clean Up: Soap and water. Dispose of contaiminated absorbent, container, and unused contents in accordance with local, state, and federal regulations.
Write Your Own Review