TimberTech® Impression Rail Express® 36 in. Universal Level Panel, Black, 8 ft.
Impression Rail Express® Universal Rail Panel Kit is contemporary, strong, and unobstructive. Lean into a minimalist railing profile with this pre-assembled, aluminum panel that keeps sightlines clear and balusters rattle-free by being locked in place. This kit creates a 36 in. final rail height and consists of a pre-assembled aluminum rail panel, a bottom rail, foot block(s), brackets, and hardware; the posts and top rail are sold separately. The panel features pre-drilled, easy-to-align, rattle-free aluminum balusters that provide a sleek profile while remaining secure, durable, and strong. Available in two lengths (6' & 8') for both Level & Stair applications.
Includes:
- Baluster Panel = 20 balusters
- Bottom Rail
- Foot Block
- Hardware & brackets
To complete your railing please be sure to purchase IRX Top Rails, and Impression Rail Post Kits or Wall Mount Kits sold separately.
Actual size 91.3 in. x 34 in.
- SUPERIOR DURABILITY: Resists fasing, staining, and scratching
- MOISTURE-RESISTANT: Resists rotting, craacking and corrosion
- Narr9ower balusters for a less obstrcuted view (up to 30% less than competitors)
- Paintable for a custom look, but not required
- Panelized railing system ofr a quick install (no fasteneing of individual balusters)
- Milled-wood-inspired design
- Elevated desgin potential: Crisp corners, tight, clean line
- The Impression Rail Express system is covered by 25-Year Limited Warranty
| Type | Railing Kit |
|---|---|
| Special Offers | Spring Decking Sale |
| Width | 1-3/4 in. |
| Length | 8 ft. |
| Height | 34 in. |
| Style | Level |
| Brand | Timbertech by Azek |
| Series/Sub-Brand | Impression |
| Color Family | Black |
| Finish | Powder Coated |
| Material | Aluminum |
| Manufacturer Code | AZTIX36UNLP8B |
Product Selection Process:
- Choose panel kit lengths for level and stair applications
- Choose top rail
- Choose post kits
- Choose accessories (Touch-Up and Bracket Jig kits).
All corresponding IRX items sold separately from panels
Suggested Tools: Appropriate fasteners for mounting posts to deck, miter saw with carbide tipped non-ferrous blade, cordless drill, tape measure, level, power cords, drop sheets and safety glasses, 3/16" Drill bit, 6" #2 Square drive bit, Installation jig (optional)
Prior to construction, check with your local regulatory agency for special code requirements in your area. Common railing height is 36" or 42".
Post spans will vary depending on job site conditions. Never span more than 8 ft. on-center between railing posts. Spans longer than 12 ft. in length will require reduced post spans. 3 in. posts are required to reach 6 ft. and 8 ft. lengths. 2 in. posts must be set in-line to panel.
Do not install post caps and vinyl post base covers until railing assembly is completed. 3 in. posts are required at all transitions. 2 in. posts may not be used to start/end a run or to form a corner. The top snap covers should snap firmly onto the aluminum railing channels. Do not use a hammer. The top rails will snap by applying pressure from one end to the other. If you’re having issues snapping on the covers, check the clips to ensure that they are bottomed out into the aluminum railing channels. Foot Blocks must be installed BEFORE installing Top Rail Snaps.
Actual Level Panel Lengths Are as Follows: 6 ft. Panels = 69.43 in., 8 ft. Panels = 91.31 in., 3 in posts are required to reach 6 ft. & 8 ft. lengths
Related Products
-
TimberTech® Impression Rail Express® Modern Top Rail, Black, 8 ft. SKU: IRAIL8MWas $76.25 Now $68.63each -
TimberTech® Impression Rail Express® Touch- Up Paint and Bracket Jig, Black SKU: IRETUWas $40.55 Now $36.50each