TimberTech® CONCEALoc® Hidden Fastener For Gun, Brown, 500 sq.ft.

CONCEALoc Hidden Fasteners were designed exclusively to install TimberTech® grooved and square shouldered boards. Tools Required: safety glasses, router with slot cutting blade, drill Always be sure to check and cut the factory cut ends of all boards to ensure they are square. • In areas with obstructed airflow such as roofs and on-grade applications, a minimum of 1½ in., sleeper system, is required. • Sleeper system must be supported by and connected to the substructure over which the deck is built. • To further minimize expansion and contraction, proper ventilation and airflow should be considered. • On-grade decks must have additional provisions for drainage beneath the deck structure. • For best practices, decking should not be installed in applications where ventilation and airflow cannot be achieved. • Do not use CONCELoc Hidden Fasteners or L-Bracket for stair installation. CONCEALoc Accessories • 100 sq. ft. coverage box. Includes stainless steel screws. • Bulk Bucket – 1,000 sq. ft. coverage. Includes stainless steel screws. • CONCEALoc Gun Pail – 500 sq. ft. coverage for use with the fastener installation gun sold separately by TigerClaw. Includes quality coated pneumatic fasteners. Stainless steel fasteners for coastal applications available through TigerClaw. • L-Bracket – avoid face-screwing by using the L-Bracket on first and last boards or as a butt seam clip to ensure a fastener-free surface. • CONCEALoc Router Bit – cut a 2 in. wide groove on a solid board for a perfect CONCEALoc fastener fit – even allows for cutting an installed board over a joist. • CONCEALoc screw packs available through www.TimberTech®store.com. • If using the CONCEALoc Gun Pail with the TigerClaw Installation Gun please refer to the retail packaging for further installation guidelines.