Sirca 1K/2K Interior & Exterior Topcoat, Clear, 10 Sheen, 5 KG
Sirca 1K/2K Interior & Exterior Topcoat, 6OWBP045Gx0 is a clear 1K or 2K topcoat designed for interior or exterior use. The product offers good chemical resistance and excellent elasticity. The overall finish will give you a fine furniture feel. For interior use, this product can be used as a 1K or 2K system.
For exterior projects, this product must be used as a 2K coating.
It is recommended to use an impregnator along with the recommended 2K water borne sealer (6FWB450) or can be used self-seal for the best overall longevity of the project. Do not use the product with temperatures below 15°C and when relative humidity is high since they affect dry times and stackability. Surfaces finished with waterborne products should be cleaned with non-aggressive detergents (not containing acids, ammonia or bleach), without abrasive properties and solvent-free. Avoid the use of acetone or alcohol.
- Color: Clear
- Topcoat
- Interior or Exterior
- Interior can be used as 1K or 2K
- Exterior use must be 2K
- Non-walkable surfaces
- Wood substrates only
- Fast-drying
- Spray application
| Type | 1K/2K Topcoat |
|---|---|
| Size | 5 KG |
| Color | Clear |
| Brand | Sirca |
| Series/Sub-Brand | Gemini |
| Color Family | Clear |
| Paint Sheen | 10 Sheen |
| Material | Water-Borne |
| Manufacturer Code | 6OWBP045G1005 |
Application Method: Traditional Spray Gun, Airless, Airmix, recommended 1 -2 coats.
Mixing Ratio Interior: 100 parts by weight of 6OWBP043GX with, 6CW5 (Optional): 20 parts by weight, Water: 0-20 parts by weight according to application device used, or 100 parts by volume of 6OWBP043GX, with 6CW5 (Optional): 25 parts by volume, Water: 0-20 parts by volume.
Mixing Ratio Exterior: 100 parts by weight of 6OWBP043GX with, 6CW5 (Mandatory): 20 parts by weight, Water: 0-20 parts by weight according to application device used, or 100 parts by volume of 6OWBP043GX, with 6CW5 (Mandatory): 25 parts by volume, Water: 0-20 parts by volume
Pot Life: 3 hours (using 6CW5 reduced at 20% at 68° F)
Coverage: 150 -180 micron (maximum). Application Amounts: 150 -180 micron (maximum). Number of coats: 1 or 2
Dry Time: 1 hour dust free, mark-proof: 1-2 hours, dry to scuff sand: 1-2 hours, stackable: 12-16 hours
Clean Up: Clean up equipment immediately after use with warm soapy water. If left sitting in the gun beyond its pot-life it will harden and be extremely hard to remove.