Simiron Cure & Seal WB for Concrete Substrates, Semi-Gloss, Clear, 5 Gallon
SIMIRON CURE & SEAL is a high-solids, water-based curing and sealing compound. As a sealer, SIMIRON CURE & SEAL is non-yellowing and blush resistant to provide a semigloss finish on concrete substrates. The self-crosslinking emulsion chemistry offers a durable film and early water-resistance to whitening or blistering. SIMIRON CURE & SEAL can transform interior, exterior, horizontal and vertical surfaces.
SIMIRON CURE & SEAL improves resistance to contaminants, stains and abrasion due to its durable film which bonds to clean concrete easily. SIMIRON CURE & SEAL allows for increased protection to properly prepared surfaces.
The self-crosslinking chemistry feature of SIMIRON CURE & SEAL takes the easy-to-spray, pure acrylic polymer solution and turns it into a hard, clear resin film that resists abrasion and staining.
- Interior/Exterior Use
- Clear with Semi-Gloss finish
- Non-Blushing Formula
- Non-Yellowing
- Resists Black Tire Marks
- Low Odor
- Low VOC
| Type | Interior/Exterior |
|---|---|
| Size | 5 Gallon |
| Color | Clear |
| Coverage | 200-400 sq. ft. per Gallon |
| Brand | Simiron |
| Finish | Semi-Gloss |
| Material | Water-Based |
| Manufacturer Code | 40004330 |
Surface Preparation: Freshly Placed Concrete: Surface must be finished to specified requirements prior to the application of Simiron Cure & Seal. Apply one uniform coat with low pressure spray and/or roller after surface water glaze has disappeared. Do not dilute or puddle. A second sealing coat may be applied 1–2 hours afterward. Apply to freshly poured concrete after surface water has evaporated. (Too much surface water can be detrimental to proper film formation.) Existing Concrete: Surface must be degreased and cleaned of all contaminants prior to the application of Simiron Cure & Seal. After area is completely dry, apply one or two uniform coats low pressure spray and/or roller. Allow first coat to dry 1–2 hours before applying the second coat.
Dry Time: Working time: 25 Minutes, Tack free: 45-60 Minutes, Recoat Time 1-2 Hours, Foot Traffic: 3-4 Hours, Vehicle Traffic 24 Hours (when re-sealing driveways) Full Cure: 5 days, all subject to ideal surface & air temerature with relative humidity of 72°F (25°C) 50% RH.
Coverage: First Coat 200–400 Sq. Ft. per gallon (4.9-9.8 m2/Liter) at 4-8 mils (102-203 microns) applied thickness. Second coat 400–600 Sq. Ft. per gallon (9.8-14.7 m2/Liter) at 2.7-4 mils (69-102 microns) applied thickness. Use a mil gauge to check application mil thickness in several horizontal spots after applying to verify proper coverage.
Clean Up: Clean tools and applicator equipment with warm water before sealer dries. After it dries, use aromatic solvent. Be sure to follow solvent manufactures safety information.
