Simiron 860FJ Joint Filler, Haze Gray, Dual Cartridge, 22 oz.

Simiron 860JF mix ratio is 1 part Base to 1 part Activator by volume. Material in pails should be thoroughly mixed before use. Mix at low speed using a power drill and paddle to ensure each part is thoroughly premixed before mixing the base and activator together using a plural mixer, do not whip air into material while mixing. Prefilled cartridges should be shaken for two minutes to ensure material is thoroughly mixed before use. Follow specific instructions on cartridge before use.

Dispensing and Filling: Use a 1/2 in. diameter static mixer with 30 or 32 elements for dispensing and proper mixing. Simiron 860 JF must be installed in the joint to full depth. Joints should be slightly overfilled so that they can be shaved flush with surrounding concrete joint edges. Take care to not trap air bubbles when filling the joints.

Shaving: Shaving Simiron JF 860 can be done as soon as 30 minutes, depending on surface and air temperature conditions. Be sure to always use a sharp blade when shaving joints flush to ensure a smooth finish.

Dry Time: Tack Free in 12-15 minutes, Light Traffic 1 Hour, Heavy Traffic 2 Hours.  Shave Time in 30 minutes up to 4 hours based on @ 72F (22C), 50% Relative Humidity. 

Approximate Coverage: 1/8 in. Joint Width, 1.5 in. Depth 103 Lf., 1/8 in. Joint Width, 2 in. Depth 77 Lf., 1/8 in. Joint Width 2.5 in. Depth 62 Lf. (See attached data sheet for more coverage approximations)