Chat with us, powered by LiveChat

Zinsser Allprime Shellac Based Primer, Quart

In stock
Only %1 left
SKU
AP20016
 
 
Seals severe stains caused by water, fire, or smoke damage; blocks knots and sap streaks; and stops stubborn bleeding stains of any kind. This versatile formula sticks to all surfaces without sanding, dries in 45 minutes, and sands easily afterward. ALLPRIME™ Shellac-Base Primer Stain Blocker is guaranteed under any topcoat, and will permanently seal persistent odors caused by smoke, pet accidents, food smells - even musty odors.
As low as $33.69
each
Select a store
1289 Available in stock
Delivery
Available
  • For interior and spot exterior use
  • Seals knots and sap streaks
  • Seals pet, smoke and musty odors
  • Sticks to all surfaces without sanding
  • Works with any top coat
More Information
Series/Sub-BrandAllprime
TypeInterior/Exterior
SizeQuart
ColorWhite
BrandAllPro
MaterialShellac-Based

Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive, or any contamination that may interfere with adhesion. If unsure of cleanliness, always wash surface with household ammonia and water solution, appropriate cleaning solution or solvent (do not use TSP as a cleaner). Remove any peeling and/or unsound coatings. Sand any remaining paint film edges smooth with the surface. Remove existing stains by washing, sanding, scraping, etc.

Dries to the touch in 20 minutes, can be recoated in 45 minutes. The primer film develops full adhesion and hardness after it cures in 1 to 3 days.

Clean up spills and paint drips with acetone, denatured alcohol, ammoniated detergent or 99% isopropyl alcohol. If spills or drips have dried, use denatured alcohol or ammoniated detergent to soften and remove primer. Dispose of unused or unwanted product in accordance with local laws regulating water-based coatings.

Coverage: 500sqft/Gallon

Write Your Own Review
You're reviewing:Zinsser Allprime Shellac Based Primer, Quart
Your Rating