SEAL-KRETE® High Performance Floor Coatings, Fast Cure Crack Repair, 9 oz.
Seal-Krete® High Performance Fast Cure High Strength Concrete Repair is a polyurethane compound developed to repair dormant control joints, spalls and pop on interior or exterior applications. It has been formulated with a very low viscosity to deeply penetrate into concrete cracks providing structural repair. Fast Cure is ideally suited to seal off cracks and saw-cuts to further enhance a seamless flooring environment. With the addition of aggregate, Fast Cure makes a high quality spall repair product that is open to traffic or floor grinding in less than 1 hour.
$27.00
each
- Color: Gray
- Bonds well to a variety of substrates including concrete,
- wood, fiberglass and asphalt
- Fast cure times, even in cold temperatures
- Return to service in 30-60 minutes
- Virtually no odor
| Series/Sub-Brand | High Performance |
|---|---|
| Type | Interior/Exterior |
| Size | 9 oz. |
| Color | Gray |
| Brand | Seal Krete |
| Color Family | Gray |
| Manufacturer Code | 852009 |
Resin Type: Polyurea
Coverage: 230 linear feet per activated gallon @ 1/4 in. wide and 1/4 in. deep. Dry Times: 20-30 minutes to harden, 30 minutes for foot traffic, 60 minutes for vehicle traffic
Pot Life: 5-8 minutes depending on air/surface temperatures,
Mixing Ratio: 1:1 (Base to activator by volume), Must mix Part A & Part B together for 20-30 seconds, the tube comes with static mixing wand. Fast-cure concrete repair cures very quickly, so only mix up amounts that can be used within 10 minutes.DO NOT hand mix.
Clean Up: Clean tools and application equipment immediately after use with an active solvent like Methyl Ethyl Ketone (MEK).
Write Your Own Review