SEAL-KRETE® High Performance Floor Coatings, Epoxy-Shell WB 250, Clear, 1 Gallon Kit
Seal-Krete® Epoxy-Shell WB 250 blends durability with outstanding adhesion and fast return-to-service It's a better value for first coat/primer application under our 100% solids Epoxy-Shell 1000 metallic systems. It's ideal for priming and high traffic areas.
NOTE: Packaging might be different than provided product image. Product picture does not depict size, check stated sizing for correct quantity.
- Easy-to-clean, high-gloss finish
- Chemical resistant
- Resistant to abrasion and scratches
- Excellent hot tire pick up resistance
- Ideal as a primer for flake floors
- Highly breathable - reduces blistering and peeling
- For vertical and horizontal applications
- Recommended primer for 100% solids Epoxy-Shell 1000
| Series/Sub-Brand | High Performance |
|---|---|
| Type | Interior |
| Size | 1 Gallon Kit |
| Color | Clear |
| Brand | Seal Krete |
| Material | 100% Solids Epoxy |
| Manufacturer Code | 560001 |
Resin Type: Cloaliphatic Amine
Coverage: 250-400 sq. ft. per gallon, coverage rates are approximate and for estimating purposes only. Surface temperature, porosity, texture and thickness will determine actual material requirements. Dry Times: 4-8 hours to recoat, 24 hours max time for recoat, 24 hours light traffic, 72 hours for vehicle traffic.
Pot Life: 60 minutes, depending on air/surface temperatures
Mixing Ratio: 3:1 (Base to activator by volume), Mix Part A by using a low speed drill with mixing attachment for 2 minutes. Add one part by volume Part B to three parts by volume Part A. Mix an additional 2 minutes. Mix only the amount of material that can be applied during the pot life (approximately 60 minutes, depending on air/surface temperatures). Do not aerate the mix. Apply immediately.DO NOT hand mix.
Clean Up: Clean tools and application equipment immediately after use with soap and warm water.