My Cart
You have no items in your cart.
Chat?
Darien, CT
Address: 181 West Ave, Darien, CT 06820
Bethel, CT
Address: 9 Taylor Ave, Bethel, CT 06801
Boston, MA
Address: 355 Newbury St, Boston, MA 02115
Branford, CT
Address: 25 E Industrial Rd, Branford, CT 06405
Danbury, CT
Address: 59-67 Federal Rd, Danbury, CT 06810
Fairfield, CT
Address: 1139 Post Rd, Fairfield, CT 06824
Hampton, NH
Address: 848 Lafayette Rd, Hampton, NH 03842
Lewisboro, NY
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Madison, CT
Address: 85 Bradley Rd, Madison, CT 06443
Middleboro, MA
Address: 149 Everett St, Middleboro, MA 02346
New Bedford, MA
Address: 1193 Ashley Blvd, New Bedford, MA 02745
New London, CT
Address: 308 S Frontage Rd, New London, CT 06320
New Milford, CT
Address: 140 Danbury Rd, New Milford, CT 06776
Newburyport, MA
Address: 201 Merrimac St, Newburyport, MA 01950
Newton, MA
Address: 50 Needham St, Newton Highlands, MA 02461
Newtown, CT
Address: 14 Church Hill Rd, Newtown, CT 06470
Niantic, CT
Address: 28 Hope St, Niantic, CT 06357
Norwalk, CT
Address: 149 Westport Ave, Norwalk, CT 06851
Orange, CT
Address: 131 Boston Post Rd, Orange, CT 06477
Plymouth, MA
Address: 58 Shops at Five Way, Plymouth, MA 02360
Portland, ME
Address: 1037 Forest Ave, Portland, ME 04103
Portsmouth, NH
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Saco, ME
Address: 35 Scamman St, Saco, ME 04072
South Portland, ME
Address: 153 Ocean St, South Portland, ME 04106
Stamford, CT (Harvard Avenue)
Address: 87 Harvard Ave, Stamford, CT 06902
Stamford, CT (High Ridge Road)
Address: 921 High Ridge Rd, Stamford, CT 06905
Stratford, CT Commercial Paint Center
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeTrumbull, CT
Address: 921 White Plains Rd, Trumbull, CT 06611
Waltham, MA
Address: 14 Warren St, Waltham, MA 02453
Westport, CT
Address: 877 Post Rd E, Westport, CT 06880
Wethersfield, CT
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Wilton, CT
Address: 129 Danbury Rd, Wilton, CT 06897
Woburn, MA
Address: 116 Cummings Park, Woburn, MA 01801
Yarmouth, ME
Address: 412 Route 1, Yarmouth, ME 04096
My Account
Sign In to My Account
- Home
- Shop
- Paint
- Specialty Paint
- Metal Paint & Primers
- Rust-Oleum® Stops Rust Semi Gloss, Protective Enamel, Black, Quart
- Rust-Oleum® Stops Rust Semi Gloss, Protective Enamel, Black, Quart
Rust-Oleum® Stops Rust Semi Gloss, Protective Enamel, Black, Quart
Rust-Oleum® Stops Rust® Oil-based Enamels provides excellent rust prevention when applied directly to metal. They also offer excellent coverage, chip resistance and color retention. For even longer,… Show more lasting protection, use a Stops Rust Primer first. Not for use of galvanized steel. Don’t settle for anything less than the #1 rust-preventative paint on the market. Nothing protects your projects like oil-based Rust-Oleum® Stops Rust® Protective Enamel paint. With many popular colors in three sheens, it’s never been easier to refinish, refresh and relax! Show less
$25.99
each
- Interior & Exterior
- Gloss finish
- Durable
- Chip resistant
- Corrosion-resistant
- Oil-based
- Not for galvanized steel
| Type | Interior/Exterior |
|---|---|
| Size | Quart |
| Color | Black |
| Brand | Rust-Oleum |
| Series/Sub-Brand | Stops Rust® |
| Color Family | Black |
| Finish | Gloss |
| Material | Oil-Based |
| Manufacturer Code | 7779502 |
Surface Preparation: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile.
Application: Before using, stir thoroughly to ensure any settled pigment is re-dispersed. If necessary, thin the material with acetone. For brush or roller, thinning is not normally required. For air spray, thin up to 15% with acetone. Do not thin with gasoline, lacquer thinner, turpentine, etc. For airless spray, thinning is not normally required. Apply with a good quality brush, roller or spray gun.Brush: Use light, even strokes. Excessive brushing reduces film thickness and protection.
Roller: Usa a 3/8 inch nap roller for rough surfaces. Cover approximately one square yard at a time. Roll away from previously coated area nd work back to it for a uniform appearance. Usa a brush on crevices and sharp edges.
Spray Gun: Follow spray gun direction carefully. Always keep the gun 10-12 inches away from the surface and in motion while spraying.
Recoat: Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Recoat after 24 hours. Do not apply Clear Enamel over Stops Rust Bright Coat FInish or Aluminum Finish.
Clean-Up: Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.
Application: Before using, stir thoroughly to ensure any settled pigment is re-dispersed. If necessary, thin the material with acetone. For brush or roller, thinning is not normally required. For air spray, thin up to 15% with acetone. Do not thin with gasoline, lacquer thinner, turpentine, etc. For airless spray, thinning is not normally required. Apply with a good quality brush, roller or spray gun.Brush: Use light, even strokes. Excessive brushing reduces film thickness and protection.
Roller: Usa a 3/8 inch nap roller for rough surfaces. Cover approximately one square yard at a time. Roll away from previously coated area nd work back to it for a uniform appearance. Usa a brush on crevices and sharp edges.
Spray Gun: Follow spray gun direction carefully. Always keep the gun 10-12 inches away from the surface and in motion while spraying.
Recoat: Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Recoat after 24 hours. Do not apply Clear Enamel over Stops Rust Bright Coat FInish or Aluminum Finish.
Clean-Up: Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.
Write Your Own Review