Rust-Oleum® Industrial Choice® Athletic Field Inverted Marking Spray Paint, Yellow, Oil-Based, Flat, 17 oz.

Surface Preparation: Remove loose debris by sweeping the surface before application of the coating.

Application: Use when temperature is 40-90°F (10-32°C) and humidity is below 85% to ensure proper drying. This product can be used down to 25°F (-4°C) which may result in a slight reduction of delivery rate. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after mixing ball is heard. Invert can and point at ground or floor. Hold can 4 to 10 inches above surface to be marked. Press in sideways to spray or use a marking wand or marking pistol. Follow directions for proper use of this equipment. Keep can moving to prevent build-up.

Clean-Up: Clean valve by spraying upright for 2-3 seconds after each use. Properly discard empty container. Do not burn or place in trash compactor. Empty container can be recycled.

Clogging: If valve clogs, carefully remove spray tip and clean in thinner. DO NOT insert any object into can valve opening

Dry Time:Product dry with 70-80°F (21-27°C) and 50% Relative Humidity in less than 5 minutes