Rust-Oleum® Frosted Glass, Acrylic Lacquer, Spray Paint, 11 oz.

Surface Preparation: Remove all dirt, grease, oil, salt, and chemical contaminants by washing the surface with soap and water and let dry.

Application:Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 65% to ensure proper drying. Do not apply to surfaces that are exposed to repeated water contact such as the inside of a shower door. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist. Shake can vigorously for two minutes after the mixing ball begins to rattle. If mixing ball fails to rattle, DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more “wet” coats a few minutes apart for best appearance. (A “wet” coat should appear shiny as it is applied to the surface.) WAIT 10 MINUTES FOR FROST EFFECT. Do not use near open flame.

Recoat: Dry and recoat times are based on 70ºF (21°C) and 50% relative humidity. Allow more time at cooler temperatures. May recoat at any time. Dries completely in 5-10 minutes.