Rust-Oleum® Appliance Epoxy, White, Gloss, Oil-Based, Spray Paint, 12 oz.
Rust-Oleum® Appliance Epoxy Enamel is a durable appliance coating that delivers an ultra-hard, moisture-resistant finish. The durable appliance paint is specifically formulated to refinish the exteriors of refrigerators, dishwashers, laundry machines and other indoor metal surfaces. Use it to fill in small imperfections or paint appliances to give them an entirely new look. Provides Stops Rust® rust protection. The epoxy appliance paint leaves a smooth, washable surface.
$14.99
each
- Interior Only
- Moisture Resistant
- Smooth washable finish
- Indoor Metal Surfaces
- Gloss Finish
- Epoxy Modified Alkyd
- Clean-Up with mineral spirits
| Type | Spray Paint |
|---|---|
| Size | 12 oz. |
| Color | White |
| Brand | Rust-Oleum |
| Color Family | White |
| Finish | Gloss |
| Material | Oil-Based |
| Manufacturer Code | 7781830 |
Surface preparation: Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry.
Application: Apply when temperature is between 50-90ºF (10-32ºC) and humidity is below 85% to ensure proper drying. Before using, mix thoroughly to ensure any settled pigment is re-dispersed. If thinning is necessary, thin the material with mineral spirits or acetone only. For small areas, use a good quality brush and apply light, even coats to ensure an even flow and finish. For large surfaces, use a good quality foam roller that is designed to give a smooth finish. Do not use near open flame.
Coverage: One quart of Appliance Epoxy will cover 120 square feet with 2 coats if applying on an average refrigerator.
Recoat: Based on 70ºF (21ºC) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Appliance Epoxy may be recoated within 1 hour or after 24 hours.
Clean-Up: Clean roller and other application tools immediately with mineral spirits. Properly discard empty containers.
Application: Apply when temperature is between 50-90ºF (10-32ºC) and humidity is below 85% to ensure proper drying. Before using, mix thoroughly to ensure any settled pigment is re-dispersed. If thinning is necessary, thin the material with mineral spirits or acetone only. For small areas, use a good quality brush and apply light, even coats to ensure an even flow and finish. For large surfaces, use a good quality foam roller that is designed to give a smooth finish. Do not use near open flame.
Coverage: One quart of Appliance Epoxy will cover 120 square feet with 2 coats if applying on an average refrigerator.
Recoat: Based on 70ºF (21ºC) and 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 2-4 hours, to handle in 5-9 hours and is fully dry in 24 hours. Appliance Epoxy may be recoated within 1 hour or after 24 hours.
Clean-Up: Clean roller and other application tools immediately with mineral spirits. Properly discard empty containers.
Write Your Own Review
