Roofing Asphalt Felt Paper, 15 lb., 432 sq. ft.
A common type of roofing underlayment that's used to protect a roof deck before shingles are installed. It's a water-resistant layer that helps prevent moisture from reaching the roof deck, which can lead to rot and other damage.
The "15 lb" refers to the weight of the felt in pounds per 100 square feet, historically, though modern manufacturing has resulted in lighter but stronger options.
As low as $26.99
Roll
- Adds a layer of protection: It helps prevent wind-driven rain, snow, and ice from reaching the roof deck.
- Provides additional weatherproofing: It acts as a secondary barrier against leaks and water damage.
- Allows for breathability: It allows the roof deck to breathe, which helps prevent moisture from building up and causing problems.
| Type | Felt Paper |
|---|---|
| Thickness | 15 lb. |
| Width | 36 in. |
| Coverage | 432 sq. ft. |
| Brand | Various |
To install 15-lb roofing felt, start by positioning the roll on the roof and rolling it out, overlapping each strip by at least 4 inches.Secure the felt with staples or roofing nails, ensuring they are spaced adequately. Work from the bottom of the roof towards the ridge, applying the felt and overlapping it as needed.
- Preparation: Ensure the roof deck is clean and dry.
- Placement: Position the roll of felt so that it can be rolled out across the bottom of the roof, even with the eaves.
- Rolling and Overlap: Roll out the felt, leaving the top portion free, and overlap the strips by at least 4 inches.
- Securing: Use staples or roofing nails to secure the felt, with fasteners spaced every 4-8 inches.
- Continuing: Continue applying the felt, overlapping each strip by 2-3 inches above the previous one.
- Trimming: At the end of the roof, trim the felt flush with a knife.
- Final Touches: Remove any creases or bubbles.
Write Your Own Review