Penofin Penetrating Oil Finish for Hardwoods
Penofin Penetrating Oil Finish for Hardwoods unique formula penetrates deep into the wood fibers and does not create a surface film. Unlike high-solid wood stains that simply coat the surface, Penofin's Hardwood Finish, using sustainably harvested Brazilian Rosewood Oil, is the choice of wood experts who know that wood penetration is key to longevity and beauty. Penofin allows wood to breathe, important in working with exotic hardwoods such as mahogany, teak, Ipe, Brazillian Redwood, and many other species. Only Penofin Penetrating Oil Finish can meet the needs of hardwood in fiber protection, penetration, stabilizing, and nourishing.
$66.99
each
- Wood stain especially formulated to penetrate dense hardwoods
- Added ultraviolet protection
- Transparent natural tone allows the beauty of wood to be seen
- Used on some of the largest theme park boardwalks in the world
- Advanced mildew protection
- Not a surface film that will crack, bubble, or peel
| Type | Oil-Based |
|---|---|
| Size | Gallon |
| Brand | Penofin |
| Color Family | Natural |
Application: Stir this product thoroughly before and during application. Apply at temperatures above 45 degrees. Penofin is stable under freeze/ thaw conditions. For optimum performance bring the stain to room temperature before application. Do not apply if the wood is hot to the touch. Using a brush, stain pad, or plastic pump sprayer apply a moderate coat to the wood. Protect, tarp or mask off any adjacent areas you do not wish to stain. Penofin is a penetrating finish and will penetrate any porous surface. Allow Penofin 20-30 minutes to penetrate into the wood. This step is important as it allows the finish to coat the individual fibers of the wood, protecting your investment from the inside out. After 20-30 minutes wipe the surface thoroughly with clean lint free cloths to remove any excess finish. Apply an additional coat three to six months after first application. This allows the pores of the dense hardwoods to acclimate to the environment & open further to accept the stain. Always clean the surface and follow instructions before each application. Penofin is a penetrating finish and is not a surface coating. Failure to wipe will allow the finish to dry on the surface of the wood and will result in a tacky finish.
Dry Time: 4 hours, 4-7 days for full cure
Clean Up: Paint Thinner, Mineral Sprits
Write Your Own Review