LUA43x series is a premium two-component, self-sealing, non-yellowing acrylic clear topcoat. Milesi acrylic polyurethane systems are the best choice for light color woods or when an open pore close to the wood look is desired. Milesi acrylic self-seal polyurethanes do not require a sealer. Generally acrylic polyurethane topcoats use medium to slow reducers to insure good flow out and leveling. Self- Seal acrylic systems normally only require 2 coats. The first acts as the sealer and the second as the topcoat.
5 KG equals approximately 1.11 gallons
20 KG equals approximately 4.33 gallons
Type | 2K Topcoat |
---|---|
Size | 5 KG |
Color | Clear |
Brand | Milesi |
Paint Sheen | 10 Sheen |
Material | Solvent-Borne |
Manufacturer Code | LUA43x |
Application Method: Airmix Spray or Hand Spray with 5.1 mils thick. Measure thickness with a mil gauge. Check Technical Data sheet for recommended tip sizes, atomization pressure, and product pressure.
Pot Life: Standard Hardener LNB99, added 10% weight, 9.7% by volume, pot life of mixed material is 24 hours. LNB99 hardener must be mechanically mixed into the resin.
Dry Time: Dust free 15 mins, To touch 40 mins, Hard dry 24 hours, Maximum time between layers without sanding 4 hours. Room temperature drying (18-22°C/64–72°F with 65-70% relative humidity) complete drying 24 hours.
Clean-Up: Clean up equipment immediately after use with acetone. Dispose of all cleaning materials and solvents in proper manner. Fluid lines can be flushed with a 1:1 mixture of water and isopropyl alcohol. When switching from water to solvent, flush with denatured alcohol or acetone after cleaning with water. This will attract any water left in the system. Then flush with the appropriate solvent to temper the gun.