Milesi 2K Interior Aromatic Pigmented Polyurethane Primer, 5KG
*On-screen and printed color representations may vary from actual tinted paint colors.
LBR102 is a premium high build polyurethane primer. Perfect for solid wood, veneer, and MDF, this primer ensures a flawless, professional finish every time. Its exceptional build and coverage minimize the need for multiple coats, saving you time and effort. The Fast-drying and easy to sand formulation allows this primer to powder up, with a sander ease of surface preparation. Whether you are creating furniture, cabinets, or any other woodwork, the LBR102 High Build White Premium Polyurethane Primer will help you achieve a flawless finish.
5 KG equals approximately 1.11 gallons
20 KG equals approximately 4.33 gallons
- Interior only
- Tintable
- Hardener sold separately
- Ease of sandability
- High Build
- Must be intermixed with hardener/catalyst
| Type | 2K Primer |
|---|---|
| Size | 5 KG |
| Color | Tintable |
| Brand | Milesi |
| Material | Solvent-Borne |
| Manufacturer Code | LBR102 |
Application Method: Airmix Spray or Hand Spray with 5-5.5 mils thick. Measure thickness with a mil gauge. Check Technical Data Sheet (Product FIles) for recommended tip sizes, atomization pressure, and product pressure.
Pot Life: Standard Hardener LNB77, added 30% weight, 35% by volume, pot life of mixed material is 2 hours. LNB77 hardener must be mechanically mixed into the resin.
Dry Time: Dust free 10 mins, To touch 30 mins, Hard dry 12 hours, Maximum time between layers without sanding 4 hours. Room temperature drying ( 18-22°C /64–72°F with 65-70% relative humidity) complete drying hours. Dry Time depends on hardener used, check technical data sheet for other compatiable hardener dry times.
Clean-Up: Clean up equipment immediately after use with acetone. Dispose of all cleaning materials and solvents in proper manner. Fluid lines can be flushed with a 1:1 mixture of water and isopropyl alcohol. When switching from water to solvent, flush with denatured alcohol or acetone after cleaning with water. This will attract any water left in the system. Then flush with the appropriate solvent to temper the gun.
