INSL-X Max Block Water-based Stain Blocking Primer, 5-Gallon, White
Max Block™ is the next generation of water-based primers formulated to provide advanced stain blocking properties when compared with other typical water-based primers. Provides a lower VOC option in lieu of an alkyd-based stain blocking primer. Dries fast and provides a mildew resistant coating. Delivers hiding capabilities and excellent sealing and holdout for a uniform finish. Specifically formulated to lock in tannin stains, preventing bleed-through. Blocks and seals common household stains, water stains, smoke damage, crayon, markers, lipstick, ball point pen and more.
- Seals difficult tannin stains
- Blocks tough household stains and odors
- For vertical and horizontal surfaces
- Fast drying – topcoat in 1 hour
| Series/Sub-Brand | Insl-X |
|---|---|
| Type | Stain Blocking Primer |
| Size | 5 Gallon |
| Brand | INSL-X |
| Material | Water-Based |
| Manufacturer Code | SB-5000 |
Clean Up: warm soapy water
Coverage: 300 – 400 Sq. Ft. per gallon
Dry Time: To Touch: 30 Minutes; To Recoat: 1 hour
Max Block Water-Based Stain Blocking Primer may be applied by brush, roller, or spray, at a rate of application not to exceed 400 square feet per gallon. Surface texture and porosity
will affect actual yield. For best brush application results, use a quality synthetic filament brush. For roller application use a 3/8” nap cover for smooth surfaces, a 1/2“ nap cover for semi-rough surfaces, and a 3/4” nap cover for rough surfaces. Apply at full strength for maximum stain blocking and sealing properties.
Max Block seals the stain and prevents it from bleeding through into the topcoat. In typical usage, difficult stains may not appear fully covered and sealed by the primer and the first finish coat. The second finish coat should provide complete coverage of the stained area. Two coats of primer may be required on severe stains.