Address: 181 West Ave, Darien, CT 06820
Address: 9 Taylor Ave, Bethel, CT 06801
Address: 355 Newbury St, Boston, MA 02115
Address: 25 E Industrial Rd, Branford, CT 06405
Address: 59-67 Federal Rd, Danbury, CT 06810
Address: 1139 Post Rd, Fairfield, CT 06824
Address: 848 Lafayette Rd, Hampton, NH 03842
Address: 386 Smith Ridge Rd, South Salem, NY 10590
Address: 85 Bradley Rd, Madison, CT 06443
Address: 149 Everett St, Middleboro, MA 02346
Address: 1193 Ashley Blvd, New Bedford, MA 02745
Address: 308 S Frontage Rd, New London, CT 06320
Address: 140 Danbury Rd, New Milford, CT 06776
Address: 201 Merrimac St, Newburyport, MA 01950
Address: 50 Needham St, Newton Highlands, MA 02461
Address: 14 Church Hill Rd, Newtown, CT 06470
Address: 28 Hope St, Niantic, CT 06357
Address: 149 Westport Ave, Norwalk, CT 06851
Address: 131 Boston Post Rd, Orange, CT 06477
Address: 58 Shops at Five Way, Plymouth, MA 02360
Address: 1037 Forest Ave, Portland, ME 04103
Address: 620 Peverly Hill Road, Portsmouth, NH 03801
Address: 35 Scamman St, Saco, ME 04072
Address: 153 Ocean St, South Portland, ME 04106
Address: 87 Harvard Ave, Stamford, CT 06902
Address: 921 High Ridge Rd, Stamford, CT 06905
Address: 160 Avon St, Stratford, CT 06615
Phone:(203) 814-3050
Store hours:
Mon - Fri7am - 5pm
SatClosed
SunClosed
HolidaysClosed
Set as default storeAddress: 921 White Plains Rd, Trumbull, CT 06611
Address: 14 Warren St, Waltham, MA 02453
Address: 877 Post Rd E, Westport, CT 06880
Address: 669 Silas Deane Hwy, Wethersfield, CT 06109
Address: 129 Danbury Rd, Wilton, CT 06897
Address: 116 Cummings Park, Woburn, MA 01801
Address: 412 Route 1, Yarmouth, ME 04096
Restores original color and luster in one step, without removing any existing finish. With simple wipe-on, wipe-off process, most finished wood surfaces that seem to need complete refinishing job can… Show more
Restores original color and luster in one step, without removing any existing finish. With simple wipe-on, wipe-off process, most finished wood surfaces that seem to need complete refinishing job can be restored in minutes. White heat rings and water marks, scratches, color fade, oxidation, smoke damage and most other blemishes can be quickly eliminated.
Type | Oil-Based |
---|---|
Size | 16 oz. |
Color | Neutral |
Brand | Howard |
Color Family | Natural |
Material | Oil-Based |
Manufacturer Code | RF1016 |
Choose the color of Restor-A-Finish
that best matches the finish of your wood. Test on an inconspicuous area. Apply
with a small pad of cloth, cover a small area at a time and immediately wipe
dry. Do not pour directly on finish. To remove stubborn white rings, oxidation,
or light scratches, apply Restor-A-Finish with a pad of super fine (0000) steel
wool. Finishes vary in hardness, so test pressure to be used with (0000) steel
wool on an inconspicuous spot. Rub lightly in the direction of the wood grain
until blemish is blended away. Cover a small area at a time and wipe dry. To
protect and maintain the newly restored finish, follow up with Howard
Feed-N-Wax.
When using a soft cloth or steel wool,
rub with light pressure but hard enough to blend away the damage. As you
restore the finish be sure to periodically check your progress. Always rub with
the grain of the wood. Some dry faded finishes will only require a quick
wipe-on, wipe-off application and will quickly absorb Restor-A-Finish. Other
finishes will require a little more work. Still other finishes may require
leaving the Restor-A-Finish on longer so it can penetrate into the finish and
restore color and depth of grain deep into the wood. All finishes are different, so testing first
may be required. Always wipe off excess Restor-A-Finish.
Drying Time:
After wiping Restor-A-Finish dry, wait
at least 30 minutes and then apply a coat of Howard Feed-N-Wax to protect and
maintain the newly restored finish. Then re-apply Feed-N-Wax as needed, or when
the finish starts to look dry.
Treating carved woods: Restor-A-Finish has saved many hours
of labor by quickly restoring color and depth of grain on carved wooden
furniture, clocks and picture frames. Simply apply Restor-A-Finish with a small
paintbrush or soft toothbrush and wipe dry.