General Finishes®, Oil-Based ARM-R-SEAL Interior Clear Topcoat, Semi-Gloss, Quart
Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, this ambering finish penetrates to provide deep-down protection for that "natural" look. Arm-R-Seal is a durable, oil-based topcoat made with high-quality urethane resins for exceptional durability. This easy-to-apply finish will bring out the natural beauty in hardwoods such as Walnut and Mahogany and will amber over time.
As low as
$32.79
each
- Clear Topcoat
- Interior Only
- Oil-Based
- Durable
- Wipe on
- Apply with Brush
- Penetrating
- Ambers over time
| Type | Urethane |
|---|---|
| Size | Quart |
| Color | Clear |
| Brand | General Finishes |
| Color Family | Clear |
| Finish | Semi-Gloss |
| Material | Oil-Based |
| Manufacturer Code | SGQT |
Application Conditions: Recommended 70°F and 50% humidity, out of direct sunlight. Variations in conditions and application technique can significantly affect dry times and coverage.
Surface Prep: Always ensure the surface is clean of contaminants and dust. Sanding any surface too smoothly can reduce adhesion and create application issues like orange peel.
Raw Wood: Sand with no finer than 220 grit sandpaper. Sanding finer than 220 grit is not recommended.
Pre‐finished Wood: Clean using 50/50 mix of denatured alcohol and water with maroon non‐woven pad. Sand with fine (220‐320) foam sanding pad or maroon non‐woven pad.
Other Substrates: Not recommended
Application Tips: For best results, apply thin coats with a rag or cloth. A foam brush may be used on flat surfaces. While Arm-R-Seal can be sprayed, it is not the recommended application method. Its thin viscosity makes it easy to apply too much product when spraying, resulting in drips and runs.
Write Your Own Review