Gemini Max Prime Interior Pre-Catalyzed Lacquer Primer, Black
Gemini's PPR-2000 is a black, pre-catalyzed lacquer primer formulated for fast cure, easy sanding and excellent filling properties. It has been designed specifically for use on MDF and wood substrates. PPR-2000 is supplied to the finisher ready to spray, thereby eliminating the need for incorporation of additional thinners. For wood substrates only. For interior use only.
- Interior
- Color: Black
- Pre-catalyzed
- MDF & Wood substrates only
- Primer
- Fast-drying
| Type | Pre-Cat |
|---|---|
| Size | Gallon |
| Color | Black |
| Brand | Gemini |
| Series/Sub-Brand | Gemini |
| Color Family | Black |
| Material | Solvent-Borne |
| Manufacturer Code | PPR-2000 |
Application Method: Using conventional, HVLP, airless, or air assisted equipment, apply this product at 3-5 wet mils per coat. Let dry a minimum 20-30 minutes. Sand with 280-320 grit, no-fill sandpaper and remove sanding dust with clean compressed air, or tack cloth. This product must be sanded in between coats to ensure proper adhesion. Typically we recommend a coating system comprised of one coat of PPR-2000 applied at 4-5 mils wet film build and 1-2 coats of an approved Gemini topcoat (see approved companion products section). On MDF we recommend two coats of primer (especially on routed areas). Refer to the Product Data Sheet for the topcoat you are using for maximum dry film thickness recommendations.
Mixing: Mix material thoroughly before and during use. Material may be mixed by hand or mechanical agitation at moderate speed.
Coverage: 449 Sq. Ft. per gallon at one mil dry film thickness.
Dry Time: Air Dry-at 78°, relative humidity 50%, To touch- 7 minutes, To Handle- 10 minutes, To sand & recoat- 20 minutes. Force Dry: Flash- 8-10 minutes, Bake- 15 at 110˚F minutes, Cool down- 15 minutes, Stack- 1 hour after cool down. Relative humidity will affect the speed of drying. Ideal conditions are 75° or warmer at 50% humidity or less. Dry time will be faster at higher temperatures and lower humidities, and equally slower at colder temperatures and higher humidities.
Clean Up: Clean equipment up immediately after use with lacquer thinner. Recommended to use SOL-9059 (HAPs Free Industrial Reducer) Reducer or SOL-9011 Non HAPs Lacquer Thinner to clean up all equipment. Dispose of in accordance with Federal, State, and Local regulations regarding pollution.