Eurolux Interior is a low-odor, high performance, fast drying waterborne finish suitable for all properly prepared interior surfaces. Eurolux may be applied over sound existing latex or oil finishes without priming, although a better appearance and enhanced durability will result if the surface is first primed with the appropriate FPE Primer. Eurolux is extremely easy to work with as it dries quickly and is completely free of odor. This remarkable paint is washable and maintainable which makes it ideal for the active lifestyle. A Eurolux Interior wall application can normally be expected to yield ten to fifteen years of beauty, pleasure and service.
Fine Paints of Europe
Eurolux flows easily, spreads quickly, and dries in one hour. Do not apply at temperatures below 40˚F or above 80˚F, or when relative humidity exceeds 80%. Surfaces must be dry, clean and free from grease. New walls should be primed with Eurolux Primer/Undercoat before receiving Eurolux Flat topcoats. Eurolux is normally rolled in a two-coat application. For both aesthetic and financial reasons, we recommend that you roll this finish as far as it will go before going back to the pan to reload your roller. New walls: Clean and Sand. If required, fill holes and cracks. Apply one coat Eurolux Interior Acrylic Undercoat. Finish with two coats of Eurolux. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 320 paper and remove all dust before applying final coat. Previously painted walls: Clean and sand. Remove all loose and flaking material. Spot prime exposed substrates with Eurolux Primer/Undercoat or reprime entire surface. Finish with two coats of Eurolux. For optimal appearance, pole-sand Primer and first coat of Eurolux glass-smooth with 320 paper and remove all dust before applying final coat. Coverage: 2.5 liter Eurogallon™ = 325 sq. ft.; 1 liter = 130 sq. ft.