Type | Adhesive |
---|---|
Size | 10 fl. oz. |
Color | Translucent |
Brand | Phenoseal® |
Material | Vinyl Acetate Homopolymer |
Manufacturer Code | 00006 |
1. Surface must be clean, dry and free of all old caulk, dirt, dust, debris and grease. Rubbing alcohol is recommended for removing soap film and soil.
2. Remove cap (from tube). Cut nozzle at 45º angle to desired bead size.
3. Load into caulking gun if using the 10 fl. oz. cartridge.
4. Fill gap with caulk, pushing caulk ahead of nozzle.
5. If necessary, smooth bead with finishing tool.
6. Clean up excess uncured caulk with a damp sponge before it skins over. Cured caulk must be cut or scraped away.
7. Caulk will dry in 12 to 48 hours, depending on joint depth, temperature and humidity. Allow caulk to dry at least 2 hours (longer in cool or humid conditions) before painting with latex or oil-based paints.
8. Reseal cartridge/tube for storage and reuse.