DAP® 100% Silicone Rubber Window, Door & Siding Sealant, White, 9.8 fl. oz.
DAP® 100% SILICONE RUBBER WINDOW, DOOR & SIDING SEALANT is a durable, 100% waterproof
and weatherproof sealant for sealing out drafts, water and moisture around windows, doors, siding, gutters,
flashing, pipes, vents and more. It stays flexible to withstand expansion and contraction without cracking or
losing adhesion. Cured sealant is mold and mildew resistant. Interior/exterior use.
$12.99
each
- Resists cracking, crumbling and chalking
- Cured sealant is mildew-resistant
- Flexible
- Indoor/outdoor use
- Minimal shrinkage
- 100% silicone sealant
- 100% waterproof & weatherproof seal
| Type | Window & Door |
|---|---|
| Size | 9.8 fl. oz. |
| Color | White |
| Brand | DAP |
| Material | Silicone |
| Manufacturer Code | 08646 |
1. If using squeeze tube, remove cap & cut nozzle at 45º angle to desired bead size. Unscrew nozzle & remove foil seal. Replace nozzle.
2. Is using cartridge, cut nozzle at a 45° angle to desired bead size. Puncture inner foil seal. Load into caulk gun.
3. Fill gap or crack with sealant.
4. If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over.
5. Allow sealant to cure for at least 12 hours before exposing to water.
6. Do not touch or clean sealant for 24 hours. Sealant reaches full cure in 24 hours.
7. Clean up excess uncured sealant from surface and tools with mineral spirits. Scrape or cut away excess cured sealant. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water.
8. Sealant is not paintable. Paint surfaces prior to applying sealant.
9. Reseal cartridge/tube for storage and reuse.
Write Your Own Review