Application: Stir well before and during use. For best results apply two coats. Some colors are low hide and may require more coats. Ensure you use the correct color undercoat as this may help reduce the number of topcoats required. Ask Ring's End for Further advice. For highly porous prepainted walls it is recommended to apply a thinned down first coat to ensure penetration into substrate, followed by two neat coats of the chosen color. If thinning is required, use water only; one-part water to ten parts paint maximum. Do not apply in conditions below 50°F. Very slight variations may occur between cans. When using more than one can make sure to batch numbers are consistent and mix in a larger container to ensure color uniformity. For best results apply by brush but do not spread too far and brush off in one direction. For roller application be sure to choose the correct roller for the surface you are painting, for unpainted hardwoods such as teak, mahogany, and cedar two coats of a stain blocking primer is recommended. For unpainted softwoods, knots must be spot primed with an appropriate knotting solution followed by Curator Prime Coat.
Coverage: 325-366 Sq. Ft.
Clean up: Soap and Water
Dry Time: To Touch 2 - 4 hours, Recoat 6 - 8 hours
Full paint properties do not develop for a minimum of 7-10 days after application (depending on drying conditions). The paint should not be washed before this time has elapsed.