Aristocrat Pour-On Liquid Glass Kit, High Gloss, Clear, Gallon Kit
*While supply lasts/Item being Discontinued
Aristocrat Liquid Glass is a two component, 100% solids, high-build epoxy coating that is high gloss, Clear pour on finish, One coat equals up to 50 coats of urethane.
Recommended for: Aristocrat Liquid Glass is used for coating picture plaques, wood, photographs, plaster, and craftwork. It can also be used for magazine and newspaper clippings, ceramic statues, general coatings, tabletops and bar tops.*Limited stock available
- Quart Kit will cover approx 35 Sq. Ft.
- High-Gloss
- Interior only
| Type | Interior |
|---|---|
| Size | Gallon |
| Color | Clear |
| Brand | BD Classic Enterprises |
| Finish | High Gloss |
Surface Preparation: For best results, the surface to be covered must be dry and free of dust, wax, grease, or oil. Surfaces should be sealed. For wood, apply 2-3 coats of a lacquer sanding sealer, sanding lightly between coats. For other surfaces, like paper, use our SEAL COAT. The item to be coated should be about 2 inches above the work area so that the extra mixture will drip off the item. It is a good idea to put a newspaper or a drop cloth under the item to catch the drips. Apply tape paste wax now to prepare the back surface of the project for easy drip removal.
Mixing: After pouring, you have about 20 minutes of working time before Aristocrat Liquid Glass begins to harden. In a clean container, mix the measured resin and hardener. Be sure to scrape the sides and bottoms of cups containing resin and hardener when pouring into container to be mixed. Stir vigorously for about 2 minutes in order to insure a beautifully finished product, it is extremely important that the resin and hardener are thoroughly mixed. If bubbles appear do not worry. After approx 2 minutes of mixing, transfer the entire batch into a second cup. Using your stick to scrape the sides and the bottom, totally empty the first cup into the second cup. Mix an additional 60 seconds and pour immediately. Larger batches of 1 qt or more will require 3-4 minutes of mixing with a straight side paint paddle. Note: When mixing large amounts of Aristocrat Liquid Glass the longer mixing time will cut back on your working time. Also a large amount of mixture will cure faster in its container. If resin bottle has been heated, working time will be approx. 10-15 minutes. We do not recommend mixing more than a 1/2 gallon mixture at a time.