ALLPRO Flex Pro 920, Urethanized Elastomeric Sealant Caulk, White, 10.1 fl. oz.
ALLPRO Flex Pro 920 is an advanced acrylic-based sealant developed by ALLPRO Corporation in collaboration with Tower Sealants. Introduced as an enhanced successor to the Flex Pro 230, this product offers improved durability, faster paint readiness, and superior performance for both interior and exterior applications.
FLEX PRO 920™ Urethanized Elastomeric Sealant is a premium grade sealant that forms a flexible, durable, airtight, water-resistant seal that offers exceptional protection from environmental conditions and features high elongation and superior recovery. FLEX PRO 920 is designed to be used on some of the most difficult applications.
Recommended for crown molding, windows /doors, baseboards. Hard enamel coatings that are prone to cracking: brick/masonry, siding/trim, drywall, countertops, glass. Exceeds the requirements of ASTM Specification C-920, Class 12.5, Type S, Grade NS.
| Type | Sealant |
|---|---|
| Size | 10.1 fl. oz. |
| Color | White |
| Brand | AllPro |
| Material | Elastomeric |
| Manufacturer Code | 13014 |
Application: FLEX PRO 920™ comes ready to use. U-shaped joints should have the proper size backer rod or bond breaker tape installed to prevent 3 point adhesion. The sealant must reach deepest point of the joint. Remove excess with a clean rag and water. Tooling the joint flush with a putty knife is recommended. Tooling results in the correct bead shape, a neat joint, and maximum adhesion. 90° joints can be tooled smooth with a moistened rag to a minimum bead size of 1/8 in.
Clean Up: Clean all equipment with warm, soapy water immediately after use. Remove cured sealant by cutting with a sharp-edged tool. Remove thin films by abrading.
Disposal: Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Contact your local sanitation department or household hazardous waste coordinator for information concerning possible reuse or disposal of unused solvent-containing adhesives and/or sealants. All material must be disposed in accordance with Federal, State, and Local Regulations.