AllPro Epoxy Floor Coatings, Universal Color Pod, Grey 305, 1 Liter

COLOR POD is used to add color to the ALLPRO® 91000 Epoxy and ALLPRO® 91020 Polyaspartic floor coating products.

Mixing Tools & Speed: Use a paddle mixer and a variable speed drill at low speed (300 to 450 rpm). Take care not to whip air bubbles when mixing as the bubbles will be difficult to remove once the product is applied.

Mixing Instructions: Always consult the Safety Data Sheets (SDS) of the products being used and wear the recommended Personal Protective

Equipment (PPE) before mixing or applying. Avoid contact with eyes and prolonged or repeated contact with skin. Measure and mix the desired amount of coating Part A, per the manufacturer’s product data sheet. Add the COLOR POD to Part A and mix for two (2) minutes. The ratio is one (1) liter COLOR POD to two (2) gallons of ALLPRO® 91000 Epoxy Part A (1 to 8 ratio) and one-half (0.5) liter COLOR POD to one (1) gallon ALLPRO®  91020 Polyaspartic Part A. Always mix COLOR POD with the Part A until homogeneous before adding the Part B.

MIX ONLY WHAT CAN BE USED IN THE INDICATED TIME FRAME TO AVOID ANY LOSS.

Application: Per the product data sheet of the product COLOR POD is added to.

Coverage & Dry Time: Per the product data sheet of the product COLOR POD is added to.

Recoating: Follow the recoating instructions of the coating used.

Clean Up: Ensure adequate ventilation. Wear suitable personal protective clothing and equipment. Clean all tools, equipment, and minor spills with xylene. For containment, ensure adequate ventilation and absorb any spill with an inert dry binding material and dispose of contents/container into safe container in accordance with local, regional, or national regulations.